Search results

Liquidtight Connector, 1/2 Inch, 45°, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Contactor, IEC, 400 Amp, 600 Volt AC Rated, 100 - 250 Volt AC/DC, 3-Pole, 1 Normally Open / Normally Closed Auxiliary Contact

Category: IEC Contactors - 66-Over Amp

Box Support. Type: Old Work. For use with Drywall, Lathe, and Plaster. Maximum Wall Thickness: 1-1/4". NOT SOLD BY THE PAIR - ORDER BY PIECE - ORDER QTY OF 2 FOR 1 PAIR

Category: Metallic Box Supports

2-1/2" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, Cut to Length

Category: Flexible Steel Conduit

275 General Purpose Amp, 600V Rated, 100-250 VAC/VDC Coil. AF-Line Series, AF140 Frame, 3-Pole, IEC Contactor with (1) N.O. & (1) N.C. Auxiliary Contact Block.

Category: IEC Contactors - 66-Over Amp

Conduit Hub, 3/4 Inch , Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Hubs

4 Amp Fuse, Time Delay, Brand or Series: KLDR, Interrupting Rating: 200000 Amp AC RMS Symmetrical, 20000 Amp DC, Terminal Type: Cartridge, Rejection, Dimensions: 13/32 Diameter x 1 1/2 Length Inch, Voltage Rating: 600 VAC/300 VDC, Features: Time Delay

Category: Class CC Fuses

ABB XT1NU3100AAA00NXXX XT1N 1

Category: 480V Rated Molded Case Circuit Breakers

1/4" x 6' Threaded Rod, Steel, Zinc Plated, Sold by the Piece

Category: Threaded Rod

Building Wire, Type XHHW, 1 AWG, Aluminum, Stranded, White, Cut to Length

Category: 1 AWG Stranded Aluminum XHHW

600 MCM, THHN/THWN-2, Stranded Copper, 600V, Blue, Cut to Length

Category: 600 MCM Stranded Copper THHN

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 2 AWG, Maximum Conductor O.D.: 0.625", Maximum Connector O.D.: 0.406". For use with 1 kV to 5 kV Non-Shielded Conductors

Category: Non-Shielded Resin Splices

Standard Fork Terminal, Vinyl-Insulated, Wire Range: 12 - 10 AWG, 600V, Stud Size: 10, Color: Yellow. Package of 50. Minimum Order of (50) Required.

Category: Vinyl Insulated Standard Fork Terminals

Filter Kit, Size/Dims: 6.72" x 6.25", Fits Louver Plate Kit: AVK66, Material/Finish: Aluminum

Category: Enclosure Louver Plate Filters

3/4 Inch Green EMT Conduit, Steel, 10 Foot Length

Category: Straight Colored Steel EMT Conduit

Ty-Rap, Cable Tie, Intermediate Cross Section, 11.1" Long, .140" Wide, Weather Resistant UV Rated Nylon 6.6, Black, 30lb Tensile Strength, 3" Max Bundle Diameter, 1000/PK

Category: Non-Releasable Cable Ties

Liquidtight Connector, Straight, 1-1/4 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Anti-Short Bushing, Non-Metallic, For Use With Cable Sizes 14-4, 12-3, 6-1, 4-1 AWG

Category: Anti-Short Bushings

Old Work Switch Box Clips, Convert Standard Switch Box to Old Work Type

Category: Metallic Box Supports

22.5 mm, Non-metallic, Selector Switch Operator, Black Bezel, Lever Type, Non-illuminated, Black, 3-Position, 45° Throw, Operating Mode: Maintained, Maintained, Maintained. NEMA Rating: 1, 3R, 4, 4X, 12, 13.

Category: 22mm Lever Selector Switches

Carbide Tipped Hole Saw, Diameter: 1-3/8", Chuck Size: 3/8", Conduit Size: 1"

Category: Carbide Tipped Hole Saws

1", Knockout Seal, Snap-In, Steel, Package Quantity: 50.

Category: Steel Knockout Seals

Duplex Receptacle Weatherproof Cover, 1-Gang, Vertical Mount, Die Cast, Gray.

Category: 1-Gang Metallic Weatherproof Box Covers

4-11/16" Square, Extension Ring, Drawn, Metallic. Depth: 2-1/8". Side Knockouts: (8) 1/2" & (4) 3/4". Cubic Inches: 43".

Category: 4-11/16" Square Metallic Box Extension Rings