Search results

Service Entrance Cable Connector, 1-1/4 Inch Diameter, Two Screw, Zinc Die Cast, For Use With NM and SE Cable

Category: Zinc Die Cast NM Cable Connectors

4 Piece, Carbide Hole Saw Kit, Sizes: 7/8" (22 mm), 1-1/8" & 1-3/8.

Category: Carbide Tipped Hole Saws

20 Amp, 125 Volt Receptacle/Outlet, 20 Amp Feed-Through, Self-Test SmartlockPro Slim GFCI, Monochromatic, Residential/Commercial Applications, Back And Side Wired, Heavy Duty, Wallplate/Faceplate And Self Grounding Clip Included - Brown

Category: 20 Amp Commercial Grade GFCI Receptacles

Baffle Trim, Deep Self Flange, Air-Shut, 6", White Baffle/White Trim

Category: 6" Baffle Recessed Lighting Trims

2-Gang, Duplex Device Receptacle Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: 2-Gang Duplex Receptacle Wallplates

EMT Set Screw Connector, 3 Inch, Steel, For Use with EMT Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408E, NEMA

Category: Steel EMT Set Screw Connectors

Thermostat Wire, Type CL2, 18/2 AWG, Solid, Copper, Brown, 500 Foot Reel, PVC Jacket, CL2, Type CM or CMH/FT1, NEC Article 725

Category: CL2 Thermostat Wire

Breaker, Molded Case, 150 Amp, 600 Volt AC, 3-Pole, High Magnetic

Category: 600V Rated Molded Case Circuit Breakers

Disconnect Switch, Non-Fusible, 60 Amp, 240 Volt AC, 3-Pole, NEMA 3R, General Duty

Category: 3-Pole 240 Volt Non-Fused General Duty Safety Switches

Insulated Liquidtight Connector, 1/2 Inch, 90 Degree, Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Fuse, 100 Amp, Class J, Dual-Element, Time-Delay, 600 Volt, LOW-PEAK, 10 Seconds (Minimum) Time-Delay at 500% Rated Current; 300,000A Interrupting Rating

Category: Class J Power Fuses

Standard Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Electro-Galvanized, Thickness .105". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Cable Tie, Nylon, Standard Cross Section, Natural Color, 11.6 Inch Long, .190 Inch Wide, 3" Maximum Bundle Diameter, 50 Pound Minimum Loop Tensile Strength, Pack of 100

Category: Non-Releasable Cable Ties

C-Tap Connector, Wire Range 3/0 AWG to 250 MCM, 1/2 Inch or 5/8 Inch Rod, (Run) 3/0 AWG to 250 MCM (Tap), Copper

Category: C-Tap Press-On Lugs

TS Bracket, 4" Square Box, Welded, Metallic. Depth: 2-1/8". Side Knockouts: (6) 1/2" & (3) 1/2" & 3/4 " TKO (eccentric) . Bottom Knockouts: (3) 1/2" & (2) 1/2" & 3/4" TKO (Concentric). Cubic Inches: 30.3".

Category: 4" Square Metallic Boxes With Brackets

Junction Box, NEMA 12, Hinged Cover, 6 x 6 x 4 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes

2 AWG, THHN/THWN-2, Stranded Copper, 600V, White, Cut to Length

Category: 2 AWG Stranded Copper THHN

Reducing Bushing, 1 Inch to 3/4 Inch, Threaded, Bushing Material: Aluminum.

Category: Aluminum Reducing Bushings

50 Amp, 125/250 Volt, NEMA 14-50R, 3-Pole, 4-Wire, Heavy Duty Flush Mount EV Charging Receptacle/Outlet, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap - Black

Category: 50 Amp Straight Blade Receptacles

Weatherproof Cover, 2 Gang, Blank, Four Screw Universal Mount, Aluminum Die Cast, Gray, Gasket and Mounting Hardware Included

Category: 2-Gang Metallic Weatherproof Box Covers

Switch Box, 1-Gang, Nail-On, Depth 3-1/16 inch, Thermoplastic, For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic New Work Switch / Outlet Boxes

3-Gang, Nail-On, Switch/Outlet Box with Speed Clamps, Thermoset Fiberglass, Depth: 3 9/16". Cubic Inches: 56.5".

Category: Non-Metallic New Work Switch / Outlet Boxes

(2) 12 AWG Conductors and (1) 12 AWG Ground, Underground Feeder, 600V, Copper Conductor, PVC Jacket, Gray, 1000 ft. Reel.

Category: 12 AWG UF / NMC

General Purpose Tape, ST17, Size: 3/4 Inch Width, 60 Foot Length. Thickness: 0.007 Inch, Black

Category: Economy Grade Vinyl Electrical Tape