Search results

20 Amp, 120/277 Volt, 1HP at 120V or 2HP at 240V-277V, Toggle Single-Pole AC Quiet Switch, Industrial Grade, Self Grounding, External Clamp-Type Terminals, Back & Side Wired, White

Category: 20 Amp Industrial Grade Toggle Switches

Strut Strap, Universal, 2 Inch, Steel With Zinc Plated Finish, Pre-Assembled, 14 Gauge Thickness, Universal Clamp for Use With EMT, IMC & GRC Conduit

Category: Strut Channel Universal Conduit Clamps

Building Wire, Type XHHW, 350 MCM, Aluminum, Stranded, Black, Cut to Length

Category: 350 MCM Stranded Aluminum XHHW

Service Entrance Cable Connector, 1-1/4 Inch Diameter, Two Screw, Zinc Die Cast, For Use With NM and SE Cable

Category: Zinc Die Cast NM Cable Connectors

4 Piece, Carbide Hole Saw Kit, Sizes: 7/8" (22 mm), 1-1/8" & 1-3/8.

Category: Carbide Tipped Hole Saws

20 Amp, 125 Volt Receptacle/Outlet, 20 Amp Feed-Through, Self-Test SmartlockPro Slim GFCI, Monochromatic, Residential/Commercial Applications, Back And Side Wired, Heavy Duty, Wallplate/Faceplate And Self Grounding Clip Included - Brown

Category: 20 Amp Commercial Grade GFCI Receptacles

Baffle Trim, Deep Self Flange, Air-Shut, 6", White Baffle/White Trim

Category: 6" Baffle Recessed Lighting Trims

2-Gang, Duplex Device Receptacle Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: 2-Gang Duplex Receptacle Wallplates

16.0 - 20.0 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic, Trip Class 10. Selectable Manual or Automatic Reset. For use with AF Series, AF9 - AF38 Frame Contactors.

Category: Overload Relays - Thermal Type

EMT Set Screw Connector, 3 Inch, Steel, For Use with EMT Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408E, NEMA

Category: Steel EMT Set Screw Connectors

Thermostat Wire, Type CL2, 18/2 AWG, Solid, Copper, Brown, 500 Foot Reel, PVC Jacket, CL2, Type CM or CMH/FT1, NEC Article 725

Category: CL2 Thermostat Wire

Breaker, Molded Case, 150 Amp, 600 Volt AC, 3-Pole, High Magnetic

Category: 600V Rated Molded Case Circuit Breakers

Fuse, 100 Amp, Class J, Dual-Element, Time-Delay, 600 Volt, LOW-PEAK, 10 Seconds (Minimum) Time-Delay at 500% Rated Current; 300,000A Interrupting Rating

Category: Class J Power Fuses

Insulated Liquidtight Connector, 1/2 Inch, 90 Degree, Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Standard Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Electro-Galvanized, Thickness .105". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Tmax Breaker Frame Size XT1N 125 Thermal Magnetic Fixed 40-500, 3-Pole Fixed+ Front Flat Terminals

Category: 480V Rated Molded Case Circuit Breakers

Cable Tie, Nylon, Standard Cross Section, Natural Color, 11.6 Inch Long, .190 Inch Wide, 3" Maximum Bundle Diameter, 50 Pound Minimum Loop Tensile Strength, Pack of 100

Category: Non-Releasable Cable Ties

C-Tap Connector, Wire Range 3/0 AWG to 250 MCM, 1/2 Inch or 5/8 Inch Rod, (Run) 3/0 AWG to 250 MCM (Tap), Copper

Category: C-Tap Press-On Lugs

Weatherproof Cover, 1-Gang, Vertical, Type: Blank, Galvanized Steel With Polyethylene Gasket

Category: 1-Gang Metallic Weatherproof Box Covers

TS Bracket, 4" Square Box, Welded, Metallic. Depth: 2-1/8". Side Knockouts: (6) 1/2" & (3) 1/2" & 3/4 " TKO (eccentric) . Bottom Knockouts: (3) 1/2" & (2) 1/2" & 3/4" TKO (Concentric). Cubic Inches: 30.3".

Category: 4" Square Metallic Boxes With Brackets

Junction Box, NEMA 12, Hinged Cover, 6 x 6 x 4 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes

2 AWG, THHN/THWN-2, Stranded Copper, 600V, White, Cut to Length

Category: 2 AWG Stranded Copper THHN

Reducing Bushing, 1 Inch to 3/4 Inch, Threaded, Bushing Material: Aluminum.

Category: Aluminum Reducing Bushings

50 Amp, 125/250 Volt, NEMA 14-50R, 3-Pole, 4-Wire, Heavy Duty Flush Mount EV Charging Receptacle/Outlet, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap - Black

Category: 50 Amp Straight Blade Receptacles