Search results

Concrete Pipe Sleeve, 3 Inch, Plastic, Black

Category: PVC Concrete Sleeves

Conduit Body, Type LC, "R" Series, 3/4", Die Cast Aluminum. Includes Cover & Gasket.

Category: Type C Aluminum Conduit Bodies

Black Resin Thermal Transfer Ribbon For Use With The TDP43ME Thermal Transfer Desktop Printer, Use With Polyester And White Polyimide Labels, Continuous Vinyl Tape, Marker Plates, And Raised Panel Labels, 4.25 Inches Wide x 300 Feet Long

Category: Label Printer Ribbons

FS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes

Lead Machine Screw Anchor, 1/4-20, Order of 1 Each = Pack of 100

Category: Machine Screw Anchors

Power Distribution Block Cover, 3 Poles, Use W/ 163 Series Power Distribution Block, Thermoplastic, Clear

Category: Non-Insulated Connector Block Covers

Category 5e, 24 AWG, 4 Pair, Unshielded Twisted Pairs, Riser, Blue, 1000 Foot Pull Box

Category: Category 5e Non-Plenum Cable

20 Amp, 120/277 Volt, Toggle 4-Way AC Quiet Switch, Commercial Grade, Grounding, Side Wired - White

Category: 20 Amp Commercial Grade Toggle Switches

4" Square, Exposed Work Cover, Type: Combination, (1) Duplex Receptacle & (1) Toggle Switch, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7".

Category: 4" Square Metallic Box Covers

Feed-Through Terminal, PUSH IN, 2.5 mm², 800 Volt AC/DC, 24 Amp, Dark Beige

Category: 2.5mm Feed Through & Ground Terminal Blocks

Multi-Tap Connector, Aluminum, Insulated, 2 Port, 2 Sided Entry, 4 AWG to 600 MCM, 600 Volt, AL/CU Rated

Category: Dual Sided Entry Wire Connector Blocks

Contactor, IEC, 225 Amp, 600 Volt AC, 48 - 130 Volt AC Control, 3-Pole, 125 Horse Power, Open, 2 Normally Open / Normally Closed Auxiliary Contacts

Category: IEC Contactors - 66-Over Amp

4 Inch Square Box, Drawn, 1-1/2 Inch Depth, Side Knockouts: (8) 1/2 Inch,(4) 3/4 Inch, Bottom Knockouts: (2) 1/2 Inch, (2) 3/4 Inch, 21 Cubic Inches, Steel

Category: 4" Square Metallic Boxes

Rigid Strut Strap, 3/4", Material: Steel, Finish: Zinc Gold

Category: Strut Channel Rigid Conduit Clamps

Conduit Body, Type: LR, Size: 1", Material: PVC. Includes: Cover & Gasket.

Category: Type LR PVC Conduit Bodies

One Piece Strut Clamp, With Back Plate. 3/4" EMT; 1/2" Rigid. Static Load Limit 200 lbs. Standard Packaging Quantity: 100.

Category: Strut Channel One Piece Pipe Clamps

Conduit Body Gasket, Convertible Solid/Open Type, Form 35 and 85, Diameter 2-1/2 to 3 Inch, Neoprene

Category: Neoprene Conduit Body Gaskets

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 250 kcmil, 1/2 Inch Bolt Hole, 1-3/4 Inch Hole Spacing, Coded Yellow, With no Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Long Barrel Copper Compression Lugs

Test Leads, Hard Point, Maximum Rating: 10A AC/DC & 1000V AC/DC, Length: 48", Includes: (1) Red Lead & (1) Black Lead

Category: Test Lead Sets

Flat Washer. Inside Size: 3/8". Outside Diameter: 7/16". Thickness: 5/64". Zinc Plated Steel. Package Quantity: 100. *Dottie Part # 31090.*

Category: Zinc Plated Flat Washers

Conduit Body, LB Type, Diameter 4 Inch, PVC, Includes Cover and Gasket

Category: Type LB PVC Conduit Bodies

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 350 MCM, 1/2 Inch Bolt Hole, Coded Red, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Threaded Conduit Nipple, 1-1/2 Inch x 4 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Conduit Body, Type: C, FM35, Size: 3/4", Material: Malleable Iron.

Category: Type C Iron Conduit Bodies