Search results

Multi-Tap Connector, Aluminum, Insulated, 3 Port, 2 Sided Entry, 10 AWG to 250 MCM, 600 Volt, AL/CU Rated

Category: Dual Sided Entry Wire Connector Blocks

Fuse, Class CC, Time-Delay, Rejection, 1 Amp, 600 Volt, 13/32 Inch x 1-1/2 Inch, Ferrule Terminal, Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity, CC-TRON

Category: Class CC Fuses

Hole Seal, for 1.50" Conduit. Size/Dims: 2.50", Material/Finish: Steel/Gray.

Category: Painted Steel Enclosure Hole Seals

1-1/4 Inch Rigid Steel 90 Degree Elbow

Category: Rigid 90° Conduit Elbows

2" PVC Conduit Cap.

Category: PVC Conduit Caps

High Performance Cable Tie, Black Color Nylon 6.6, Length of 342mm (13.5 Inches) for Bundle Diameter up to 102mm (4 Inches), Width of 6.9mm (0.27 Inch), Tensile Strength Rating of 534 Newtons (120 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 85 Degrees Celsius (185 F), Bulk Pack

Category: Non-Releasable Cable Ties

250 MCM, THHN/THWN-2, Stranded Copper, 600V, Brown, Cut to Length

Category: 250 MCM Stranded Copper THHN

High Performance Cable Tie, Black Color Nylon 6.6, Length of 457mm (18 Inches) for Bundle Diameter up to 127mm (5 Inches), Width of 6.9mm (0.27 Inch), Tensile Strength Rating of 534 Newtons (120 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 85 Degrees Celsius (185 F), Bulk Pack

Category: Non-Releasable Cable Ties

Knockout Seal, 1/2 Inch, Snap-In, Steel

Category: Steel Knockout Seals

Designed for residential and light commercial applications where duty is not severe. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type GD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism (30-200 amp). 60/75 C conductor rating. TGN38784

Category: 3-Pole 240 Volt Non-Fused General Duty Safety Switches

Conduit Body Gasket, Type: Solid, FM7, Size: 2", Material: Neoprene.

Category: Neoprene Conduit Body Gaskets

Pistol Handle Shaft. Size: 6 x 170 mm (6.69"). For use with Pistol Handles.

Category: Disconnect Switch Shafts

Adhesive Cable Tie Mount, .63 x .63 Inch, .10 Inch Max Tie Width, .11 Inch Hole Dia, PA66/SR T50, White, 100/pkg

Category: Cable Tie Bases

Mushroom Head Toggle Bolt, 3/16" x 3", Order of 1 Each = Pack of 50

Category: Toggle Bolts

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

1-1/2 Inch Liquidtight Steel Flex, UL Listed, Type UA, Steel Core, PVC Jacket, Gray, Cut to Length, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

4 Inch Square, Exposed Work Cover, (2) Toggle Switches, 1/2" Raised, Drawn, Steel, 7 Cubic Inches

Category: 4" Square Metallic Box Covers

Ground Bar, 18 Port, Universal, Bonding Stand Offs, 14 AWG - 4 AWG

Category: Load Center Neutral & Ground Bars

Ground Clamp, Cable to Water Pipe or Copper Tube, 10 AWG to 2 AWG, Pipe Size 1/2 Inch to 1 Inch, Cast Bronze, Silicon Bronze Hardware, Direct Burial Rated

Category: Bare Wire Ground Clamps

Tmax Breaker Frame Size XT1N 125 Thermal Magnetic Fixed 40-500, 3-Pole Fixed+ Front Flat Terminals

Category: 480V Rated Molded Case Circuit Breakers

Fence Post Grounding Connector, U-Bolt Type, 3/8 Inch Pipe Size, 2/0 AWG to 250 MCM Wire Size, For Use as Parallel or 90 Degree Connection, Copper Conductors Only, Rated for Direct Burial

Category: U-Bolt Ground Clamps

3" PVC Bell End.

Category: PVC Bell Ends

Conduit Bushing, Insulating, 3/4 Inch Diameter, Threaded, Non-Metallic, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Body Cover with Neoprene Gasket, Type: Wedge, FM7, Size: 3/4", Material: Sheet Steel.

Category: Steel Conduit Body Covers With Gaskets