Found 252 in Bare Wire

Bare Ground Clamp / Water Pipe, 10 AWG to 2 AWG, Pipe Size 1/2 Inch to 1 Inch, Die Cast, Zinc Plated Steel Hardware

Category: Bare Wire Ground Clamps

Ground Clamp, Cable to Water Pipe or Copper Tube, 10 AWG to 2 AWG, Pipe Size 1/2 Inch to 1 Inch, Cast Bronze, Silicon Bronze Hardware, Direct Burial Rated

Category: Bare Wire Ground Clamps

Bare Ground Clamp / Water Pipe, 10 AWG to 2 AWG, Pipe Size 1-1/4 Inch to 2 Inch, Cast Bronze, Zinc Plated Steel Hardware

Category: Bare Wire Ground Clamps

Ground Pipe Clamp With Lay-in Lug, Pipe 1/2 - 1 Inch, #4 - #6 Rebar, Ground Rod 3/8 - 1 Inch, 10 - 2 AWG, Bronze Alloy

Category: Bare Wire Ground Clamps

Mechanical Grounding Connector, Cable to Water Pipe, 6 AWG - 250 kcmil, 1-1/4" - 2" Pipe, Al/Cu Rated.

Category: Bare Wire Ground Clamps

Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 - 2 AWG, 1/2"- 1" Water Pipe,pipe clamp:50 in-lb.

Category: Bare Wire Ground Clamps

Bare Ground Clamp / Water Pipe, 14 AWG to 1/0 AWG, Pipe Size 1/2" to 1", Finish: Tin Plated; Material: High Strength Extruded Aluminum Alloy Body, Dual Rated for CU/AL; Screw Type: Slotted

Category: Bare Wire Ground Clamps

Bare Ground Clamp / Water Pipe, 6 AWG to 250 MCM, Pipe Size 2-1/2" to 4", Finish: Tin Plated; Material: High Strength Extruded Aluminum Alloy Body, Dual Rated for CU/AL; Screw Type: Hex Socket

Category: Bare Wire Ground Clamps

Ground Clamp, Water Pipe: 1/2 to 1 Inch, Wire Range: 10 to 2 AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Bronze

Category: Bare Wire Ground Clamps

Ground Clamp, 1/2 to 1 Inch, 2 to 10 AWG, Bronze

Category: Bare Wire Ground Clamps

Bare Ground Clamp, Clamp Material: Brass, Screw Material: Steel , Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 1-1/4" - 2".

Category: Bare Wire Ground Clamps

Bare Ground Clamp / Water Pipe, 10 AWG to 2 AWG, Pipe Size 2-1/2 Inch to 4 Inch, Cast Bronze, Zinc Plated Steel Hardware

Category: Bare Wire Ground Clamps

Lay-in Lug, with Washer, Electrical Equipment Bond, 14 to 6 AWG, 1/4 Inch Hole, 1/4 Inch Hardware Included.

Category: Bare Wire Ground Clamps

Bare Ground Clamp, Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 1-1/4" - 2". *Dottie Part # 10025.* For Use in grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Bare Wire Ground Clamps

Ground Clamp, Type GC, 1/2 - 1 Inch, High Strength Cast Copper Alloy with Bronze Alloy Hardware, Can Be Used on Water Pipes, Conduits, or Pipe Electrodes, Suitable for Direct Burial in Concrete

Category: Bare Wire Ground Clamps

Bare Ground Clamp / Water Pipe, 10 AWG to 2 AWG, Pipe Size 1/2 Inch to 1 Inch, Cast Bronze, Silicon Bronze Hardware, Light Duty

Category: Bare Wire Ground Clamps