Search results

20 Amp, 1-Pole, Molded Case Circuit Breaker, TEY Type, Bolt-On, 14 kAIC, 277 Volt AC, 250 Volt DC, Fixed Thermal-Magnetic Trip

Category: 1-Pole 277/480V Bolt-On Circuit Breakers

Band Saw Blade, Deep Cut, Length: 35-3/8 Inch, Width: 1/2 Inch, Teeth Per Inch: 18 TPI, 3-Pack

Category: Bandsaw Blades

4" Round, Ceiling Pan, Metallic. Depth: 1/2".Bottom Knockouts: (5) 1/2". Cubic Inches: 6".

Category: Metallic Ceiling Pans

Right Angle Type K-Clamp, 1 inch, Malleable Iron, Hot-Dipped Galvanized.

Category: Malleable Iron EMT Right Angle Type K-Clamps

Terminal Strip, Heavy Duty, 10 to 18 AWG, 12 Circuits, 30 Amp, 600 Volt

Category: Terminal Strips

High Performance Cable Tie, Weather and Ultraviolet Resistant for Indoor and Outdoor Applications, Black Color Nylon 6.6, Length of 361mm (14.2 Inches) for Bundle Diameter up to 102mm (4 Inches), Width of 4.67mm (0.184 Inch), Tensile Strength Rating of 220 Newtons (50 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 105 Degrees Celsius (221 F), Bulk Pack

Category: Non-Releasable Cable Ties

Mounting Bracket. 1-Gang, Low Voltage, Old Work, Non-Metallic. For use with Low Voltage Class 2 Applications. For Installations on Existing Construction. Includes: Swing Arms.

Category: Non-Metallic Old Work Mounting Brackets

Commercial Spec Grade Duplex Receptacle with side wire is corrosion-resistant with a plated steel strap locked in to face and back body to resist pulling away from face/body assembly. It has an easily accessed break-off, line-contact connecting tab for fast for easy split-circuit wiring. It also has an impact-resistant nylon face and thermoplastic back body. 20amp, 125volt, White

Category: 20 Amp Commercial Grade Duplex Receptacles

Antenna Amplifier, DC Passing, U.S. Cable, 560 - 614 MHz, 6 Volt DC, 55mA Current Draw

Category: Communication Cables

LED Photocell, 6A, 105-305V, 1000W, 1800 VA, Stem & Swivel Mounting

Category: LED Photo Controls

EMT Set Screw Connector, 1 Inch, Insulated, Steel With Zinc Plating, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

Breaker, Surge Protection Device, with Pig Tail, Residential

Category: Surge Breakers

Service Entrance Cap, 2 Inch, Clamp-On, Aluminum, For Use With Rigid/IMC/EMT Service Masts

Category: Service Entrance Caps - Metallic

3/0 AWG, THHN/THWN-2, Stranded Copper, 600V, White, Cut to Length

Category: 3/0 AWG Stranded Copper THHN

Chase Nipple, 3/4 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Reducing Washer, 3/4 Inch To 1/2 Inch, Steel, Zinc Plated

Category: Reducing Washers

40A Standard Thermal Magnetic Branch Circuit Breaker, 120/240 VAC, 2-Pole

Category: Residential 2-Pole Circuit Breakers

Grounding Bushing, 1-1/2 Inch, Threaded, Insulated, 1/0 to 14 AWG, Zinc, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

EMT Compression Coupling, 1-1/4 Inch, Concrete Tight, Steel, For Use with EMT Conduit, UL 514B

Category: Steel Concrete Tight EMT Compression Couplings

EMT Connector, Set Screw, 1 1/4 inch, Material: Steel, For Use with EMT Conduit, UL 514 B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF 408E, NEMA

Category: Steel EMT Set Screw Connectors

Spring Nut, 3/8-16 Thread, 3/8 Inch, Steel/Electro-Galvanized, For Use With P1000,P1100,P2000, P3000

Category: Strut Channel Spring Nuts

Medium base, phenolic, one-piece keyless, 4 terminals with tri-drive scews, fits 3 1/4 and 4 boxes, with cage necks, 6 Leads. White.

Category: Keyless Incandescent Lampholders

3/4 Inch Liquidtight Steel Flex, Type EF - Extra Flexible, PVC Jacket, Gray, 100 Foot Coil, General Construction Grade, No Bonding Wire

Category: Liquidtight Flexible Metallic Conduit

Universal Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Electro-Galvanized, .075" Thickness, Universal Clamp for EMT, IMC & GRC.

Category: Strut Channel Universal Conduit Clamps