Search results

Strut Clamp, Size: 1-1/2 Inch, 1-Piece, Steel/Electro-Galvanized

Category: Strut Channel One Piece Pipe Clamps

Detectable Cable Tie, Heavy Cross Section, 13" Long, .270" Wide, Bright Blue Nylon 6.6 Compound, Stainless Steel Locking Device, 120lb Rating, 3-1/2" Max Bundle Diameter, 50/PK

Category: Non-Releasable Cable Ties

Compact Pushbutton, Momentary, Flush, 22mm, Non-Illuminated, Red w/ Black Plastic.

Category: 22mm Flush Pushbutton Operators

Standard Cable Tie, 5-1/2 IN L x 0.14 IN W x 0.05 IN THK, Nylon/Polyamide 6.6

Category: Non-Releasable Cable Ties

Indoor Load Center with Main Lugs Factory Installed, 20 Spaces, NEMA 1 Rated. Includes Enclosure and Interior Only. Door Sold Separately

Category: 1-Phase Convertible Copper Bus Load Centers

Threaded Conduit Nipple, 1 Inch x Close, Aluminum, For use with Rigid Threaded Conduit

Category: Aluminum IMC Conduit Nipples

Strut Universal Clamp, 3/4 Inch, 1-1/4 x 2.16 x 1.11 Inch, Steel With Electro-Galvanized Finish

Category: Strut Channel Universal Conduit Clamps

Expansion Module, PACSystem RX3I, for 7 Racks, 320 Discrete In & Out I/O, Back Plane Mounting

Category: PLC Logic Expansion Modules

Layin Galvanized Closure Plates used for closing and sealing the end of a wireway section or run. This Closure Plate With Knockouts, F66GCPGV item measures 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Wireway Closure Plates

Self-Drilling Screw, Hex Washer Head, 10 x 1-1/2", Steel, Zinc Plated, Order of 1 Each = Pack of 100

Category: Hex Washer Head Self Drilling Screws

Flex Connector, Squeeze, Straight, 3/8 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

Hex Nut Sleeve Anchor, 3/8 x 1-7/8

Category: Hammer-In Sleeve Anchors

Conduit Bushing, Insulating, 1-1/4 Inch, Threaded, Gray, Plastic

Category: Rigid & IMC Bushings

FS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes

Transformer, Dry Type, Type QL, 45 KV, 480 Delta - 208Y/120 Volt AC, 150C Rise

Category: 40 - 45 KVA Dry Type Transformers

Conduit Hub With Thermoplastic Insulated Throat, Sealing Ring Nitrile, 1 IN, Use With Rigid/IMC Conduit, Zinc

Category: Die Cast Zinc Conduit Hubs

Handy Box, 1-7/8 Inch Deep, Side Knockouts: (3) 1/2 Inch, End Knockouts: (1) 1/2 Inch, Bottom: (2) 1/2 Inch, Cubic Inches: 13.0, Drawn, Steel

Category: Metallic Handy Boxes

Mounting Bracket. 1-Gang, Low Voltage, Nail-On, Non-Metallic. For use with Low Voltage Class 2 Applications. Fits 1/2" Drywall.

Category: Non-Metallic New Work Mounting Brackets

1-1/4 Inch Yellow Electrical Non-Metallic Tubing (ENT), 750 Foot Reel

Category: Blue ENT Conduit

Emergency Stop Control Station with Shroud, Surface Mount, Plastic Enclosure with 1/2" & 3/4" K.O.'s. Includes: Red, Twist Release Pushbutton with (2) NC Contacts. Yellow Over Light Gray. 600V Rated, NEMA: 1, 3R, 4, 4X, 12, 13.

Category: 1-Element Control Stations

80 Amp, 3-Pole, Miniature Industrial Circuit Breaker, Bolt-On Type, Q-Line Series, 10 kAIC, 120/240 VAC.

Category: 3-Pole 120/240V Bolt-On Circuit Breakers

Standard Cable Tie, Non-Releasable. Length: 5.5" (140 mm). Width: 0.140" (3.556 mm). Color: White. Package Quantity: 100.

Category: Non-Releasable Cable Ties

Spring Nut, B-911 Series, Size: 1/4", Material: Steel, Finish: Galv-Krom

Category: Strut Channel Spring Nuts

Manual Motor Protector, 10 - 16 FLA (Full Load Amps), 600 Volt AC Rated, Trip Class: 10. Type MS132. Includes: Short Circuit Protection and Phase Failure Detection, Small 45 mm Width.

Category: Manual Rotary Motor Controllers