Search results

Bushing, Type Insulating, Threadless, Size 3-1/2 Inch, Non-Metallic, For Use With EMT Conduit

Category: EMT Bushings

Electrical Tester, Maximum Voltage 600 Volt AC/DC, Maximum 200 Amp, 17.800 mm Jaw Opening, Does Not Require Test Leads

Category: Voltage & Continuity Testers

Miniature Circuit Breaker, 2-Pole, 4 Amps, 480Y/277V AC. D-Curve. 10 kAIC. ST200M Series. Supplemental Protectors. UL 1077, CSA 22.2.

Category: 2-Pole DIN Rail Mount Circuit Breakers

THB 2921SST 1/2IN STR LT RELI

Category: Straight Stainless Steel Liquidtight Flex Connectors

Surge Protection Device, 6-Mode, Type 1 & 2, 1-Phase, 120/240V AC, 3-Wire + Ground, Max Surge Current Per Phase: 20 kA, NEMA 3R, Panel Mount.

Category: Panel Mount Surge Protection Devices

MC Cable Connector, Duplex, Snap-In, 1/2 Inch Knockout, Cable Diameter (2) 0.525 - 0.640, Aluminum

Category: Double Barrel MC / AC Connectors

Non-Metallic, Internal Elbow, 400 Series. Size: 1-1/2" Length. PVC, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Black, Shrink Ratio: 2:1, Size: 3/8 Inch, Expanded Insulation Diameter: .375 Inch, Recovered Insulation Diameter: .187 Inch, Tube Length: 6 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Drill Bit, Masonry, 4-Cutter, Length: 6", Diameter: 5/32", Shank: SDS.

Category: SDS Masonry Bits

Gang Box, 5-Gang, Welded, Steel, Depth: 2-1/2 Inch. Width: 12-1/4 Inch, Side Knockouts: (4) Concentric KOs, Bottom Knockouts: (6) 3/4 Inch and (4) Concentric KOs, Top Knockouts: (6) 3/4 Inch and (4) Concentric KOs, Back Knockouts: (3) 1/2 Inch and (2) 3/4 Inch, Cubic Inches: 130 Inch.

Category: Metallic Gang Boxes

USB Rechargeable ROVER™ Pocket Flood Light, Water and Dust Resistant, High Mode: 445 Lumens - 2 Hrs. Low Mode: 100 Lumens - 11 Hrs.

Category: Pocket / Key Chain Flashlights

Liquidtight Connector, 1 Inch, Straight, Bullet Type, Non-Metallic, For Use With Type B Liquidtight Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

1 AWG XHHW Stranded Aluminum, Gray, Cut to Length

Category: 1 AWG Stranded Aluminum THHN

Heat Shrink, 2 to 4/0 AWG, Heavy Wall, Adhesive Lined, 48 Inch, Shrink Ratio: 3:1, Expanded Insulation Diameter: 1.10 Inch, Recovered Insulation Diameter: .38 Inch, Black

Category: Heavy Wall Heat Shrink

Anti-Short Bushing, Diameter: 7/16", Material: Non-Metallic. For use with Cable Sizes: 12-4, 10-2, 10-3 & 2-1.

Category: Anti-Short Bushings

Bulkhead Fitting, 3/4 Inch, Insulated Throat, Nitrile Sealing Ring, Zinc, For Use With Rigid/IMC Conduit

Category: Die Cast Through-Bulkhead Conduit Hub Fittings

NM Flex Connector, 2-Screw, Straight, 1 Inch, Material: Steel, For Use With Flexible Metal Conduit

Category: Steel NM Cable Connectors

1-Gang, Duplex Device Receptacle Wallplate, Midway Size, Material: Thermoset, Device Mount - Color/Finish: White

Category: Midway & Oversized Duplex Receptacle Wallplates

Reducing Washer, 2 x 1 Inch, Steel

Category: Reducing Washers

Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPST, 4-Hour Max, Without Hold, Silver

Category: In-Wall Spring Wound Time Switches

Bi-Metal Reciprocating Saw Blade, 6" Long x 3/4" Wide x .035" Thick, 24 TPI, 5/Pack

Category: Bi-Metal Reciprocating Saw Blades

Heat Shrink Tubing, Thin Wall, 1/2 Inch, Expanded Inner Diameter 0.500 Inch, Recovered Inner Diameter 0.250 Inch, 2:1 Shrink Ratio, 200 Foot Spool, Flexible Polyolefin, Black

Category: Thin Wall Heat Shrink

Adhesive-Backed 4-Way Cable Tie Mount, 0.75” x 0.75” (19.1mm x 19.1mm), ABS, White, Package of 500

Category: Cable Tie Bases

Straight-Claw Hammer, 18-Ounce Forged Steel Head, 15-Inch Overall Length, Non-Slip Grip For Comfort And A Hang Hole For Tethering Ability Or Hanging Storage

Category: Claw Hammers