Search results

4 Inch Square Box With Raised Ground, Drawn, 2-1/8 Inch Depth, Side Knockouts: (8) 1/2 Inch, (4) 3/4 Inch, Bottom Knockouts: (2) 1/2 Inch, (2) 3/4 Inch, 30 Cubic Inches, Steel

Category: 4" Square Metallic Boxes

Multi-Tap Connector, Aluminum, Insulated, 4 Port, 1 Sided Entry, 14 AWG to 4 AWG, 600 Volt, AL/CU Rated

Category: Single Sided Entry Wire Connector Blocks

Filler Plate for Branch Breaker Slot, Used with TQD, THQD, TED4, SE, FB Series Breakers

Category: Load Center Filler Plates

Copper Tubing Hylink Splice, 2/0 AWG, .790" Long, Tin Plated

Category: Standard Barrel Copper Compression Sleeves

Framing Screw, Self-Piercing, Pan Head - Phillips, #6 x 7/16, Order of 1 Each = Pack of 1000

Category: Fine Thread Drywall Screws

Tray Cable, Type TC, 10 AWG, 2 Conductor, Copper, EPR Cut to Length

Category: SDT / TC / TC-ER Tray Cable

SHOCKWAVE™ Impact Duty™ Step Bit #9 7/8" & 1-1/8", 13 Steps With Laser Engraving For Clear Stop On Size Identification, Titanium Aluminum Nitride

Category: Step Bits

Aluminum Multiple Tap Connector, Clear Insulated, 3 Port, 1 Sided Entry, 10 AWG-250 kcmil, Al/Cu Rated.

Category: Single Sided Entry Wire Connector Blocks

Adjustable Heavy Duty Box Hanger, 24 IN, Height Adjustment 1-1/2 To 2-1/8 IN, Galvanized, 70 LB, 24 IN OAL

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

Conduit Body, Type: LC, "R" Series, Size: 2", Material: Die Cast Aluminum. Includes: Cover & Gasket.

Category: Type C Aluminum Conduit Bodies

Conduit to Beam Fastener, 1 Inch Conduit, 1/8 to 1/4 Inch Flange, Side-Mount, Guide-Rite, Will Rotate 360°, Install with Hammer and Pliers

Category: Flange-Mount Cable/Conduit Clips

4 in. Poly Plug with Pulling Eye

Category: PVC Plugs

Auxiliary Contact Kit, for 30 Amp, TH, THN Disconnects, Rated 10 Amp at 125/250 Volt AC, 0.30 Amp at 125 Volt DC, 0.15 Amp at 250 Volt DC, 3-Pole Double Throw

Category: Starter & Contactor Auxiliary Contacts

120V AC GFCI Receptacle Tester, Detects Common Wiring Problems in Receptacles, Confirms Operation of GFCI Protective Devices

Category: Receptacle Testers

Panelboard Enclosure, Galvanized Steel, 82.5 Inch x 20 Inch x 5.81 Inch, NEMA 1, For 77.5 Inch - 82.5 Inch Panels

Category: Panelboard Cans

Compact, two-piece, high strength, high copper alloy BURNDY OKLIP recommended for heavy duty connections. Neoprene rings hold DURIUM bolts in place during installation.Installed with ordinary wrench.Recommended tightening torque:250 in-lb.

Category: 2-Bolt Copper Tap Connectors

Self-Drilling Screw, Pan Head - Phillips, # 8 x 1/2", Steel, Zinc Plated, Order of 1 Each = Pack of 100

Category: Phillips Pan Head Self Drilling Screws

Sealing Locknut, 1 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Liquidtight Cord Connector, 90°, NPT Hub Size: 1/2 Inch, Cord Range: 0.400 Inch - 0.560 Inch, Material: Nylon, Color: Black Beauty.

Category: 90° Non-Metallic Cord Grips

Ground Bar Kit, 4 Hole, PowerMark Gold

Category: Load Center Neutral & Ground Bars

Work Light, Bulb Type: LED, Body Color: Red & Black, Light Color: White, Power Requirements: M18 Battery, 100 Lumens, 135° Rotating Head, Up to 10 Hours Run time with 5aH Battery.

Category: Battery Operated Work Lights

FM9 UNILETS Type TB Conduit Outlet Body, Hub Size: 3/4 IN, Form: 9, Length: 5.69 IN, Width: 1.56 IN, Height: 3.03 IN, Material: Aluminum, Finish: Natural Aluminum, Connection: Tapered Female Threaded, Standard: UL 514A, UL 514B, UL File Numb

Category: Type TB Aluminum Conduit Bodies

Female Connector, 1/2 Inch Air Cell, Plenum & In-Conduit Cables, 50 Ohm, PIM Rated

Category: Straight Aluminum Cord Grips

Wire Harness Assembly - Customer Special

Category: Wire Harness Assemblies