Search results

Fuse Holder, Breakaway, Single-Pole, In-Line, for 13/32 Inch x 1-1/2 Inch Fuse, TRON, Load-12-3 AWG Copper Set-Screw, Line-(2) 12-2 AWG Copper Set-Screw

Category: In-Line Fuse Holders

Compact, two-piece, high strength, high copper alloy BURNDY OKLIP recommended for heavy duty connections. Neoprene rings hold DURIUM bolts in place during installation.Installed with ordinary wrench.Recommended tightening torque:250 in-lb.

Category: 2-Bolt Copper Tap Connectors

200W Power & Color Selectable Round LED Highbay Gen 2 200/150/100W 90 Deg Lens 12-Inch Diameter 120-277V 3000K/4000K/5000K 0-10V Dimming Built-In Sensor Receptacle Standard Black Housing O-Bolt & J-Hook Included

Category: LED - High Bays

IDEAL, Grounding Tail, Combo, Length: 8 IN, Wire Size: 12 AWG, Wire Type: Solid, Includes: Tail With Lloop & Ground Screw And Stripped End

Category: Stranded Wire Ground Pigtails

THB 5623 2 INCH T&B EMT INSUL

Category: Steel Concrete Tight EMT Compression Connectors

Main Breaker Retainer, for use with TM/TLM1212CCU Mod 2 Current Model

Category: Circuit Breaker Hold Down Kits

Work Light, Bulb Type: LED, Body Color: Red & Black, Light Color: White, Power Requirements: M18 Battery, 100 Lumens, 135° Rotating Head, Up to 10 Hours Run time with 5aH Battery.

Category: Battery Operated Work Lights

Panel Board, Interior, 225 Amp, 208Y/120 Volt AC, 42 Circuit, 3-Phase, Copper Bus, Non-Feed Through, 43.5 Inch Height, 4-TGL2 Ground Bars Included

Category: Panelboard Interiors

Set Screw Connector, Insulated and Concrete Tight, Conduit Size 3-1/2 Inches, Length 3.906 Inches, Material Zinc Plated Steel, For use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

90 Amp, 3-Pole, Miniature Industrial Circuit Breaker, Bolt-On Type, Q-Line Series, 10 kAIC, 120/240 VAC.

Category: 3-Pole 120/240V Bolt-On Circuit Breakers

Construction Spec Grade Duplex Receptacle, Back and, Side Wire 20amp 125volt, White

Category: 20 Amp Industrial Grade Receptacles

Fuse Bases, 200 Amp, Stud Height: 1 Inch, Stud Thread: 5/16-18, Base Material: Phenolic, The Simpler Design Is The C5268 Series Modular Fuse Base. With This Design, The Fuse Terminal and Cable (With Termination) Are Mounted on The Same Stud, Minimizing Labor Needed For Installation.

Category: Terminal Junction Blocks

Miniature Circuit Breaker, 1-Pole, 5 Amps, 480Y/277V AC. C-Curve. 10 kAIC. ST200M Series. Supplemental Protectors. UL 1077, CSA 22.2.

Category: 1-Pole DIN Rail Mount Circuit Breakers

ABB KXT4CUAL3-3PC

Category: Molded Case Circuit Breaker Lug Kits

Compression Line Tap Connector for Aluminum to Copper and Aluminum to Aluminum Applications, 1.47" Height, 1.88" Length, .87" Width

Category: H-Tap Press-On Lugs

CB 80A C.LIMIT L-IR XT2 W/ROTARY MEC

Category: 600V Rated Molded Case Circuit Breakers

Abb Ls45m51b11 Lmt Sw 40mm Ad

Category: Assembled Limit Switches

A3 LIGHT 120V GRN LED

Category: Assembled Pilot Lights

20A 125VAC COMM GFR IVORY

Category: 20 Amp Commercial Grade GFCI Receptacles

4 Pair / 23 AWG, CMR, Category 6, Riser, Blue, 1000 Foot

Category: Category 6 Non-Plenum Cable

Wallplate, Duplex, 1-Gang, Nylon, TradeMaster, Standard Size, Device Mount, Ivory.

Category: 1-Gang Duplex Receptacle Wallplates

30 Amp, 2-Pole, Miniature Industrial Circuit Breaker, Bolt-On Type, Q-Line Series, 10 kAIC, 120/240 VAC.

Category: 2-Pole 120/240V Bolt-On Circuit Breakers

PVC Primer, Low-VOC, 1 Quart, Purple, For Use With PVC and CPVC

Category: PVC Cement

Reducing Bushing, 1-1/2 x 1 Inch, Steel With Zinc Plating, For Use with Rigid/IMC Conduit

Category: Steel Reducing Bushings