Search results

Reducing Washer, 1-1/2 x 1-1/4 Inch, Steel

Category: Reducing Washers

Liquidtight Connector, 90 Degree, Diameter 2-1/2 Inch, Malleable Iron With Zinc Finish, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Ergonomic Hand Tool for Crimping RA, RB, RC Insulated Terminals/Splices/Disconnects

Category: Wire Crimping Tools

Beam Clamp, Push-Type, 1 Inch, 1/8 to 1/4 Inch Flange, 360° Rotation, Steel

Category: Flange-Mount Cable/Conduit Clips

Ceiling/Wall Fan, 50 CFM, 120V, White

Category: Ceiling / Wall Fans

Conduit Bushing, Insulating, 1-1/4 Inch Diameter, Threaded, Non-Metallic, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Cable Pulling Lubricant, Aqua-Gel II, Includes: 1-Gallon Bucket

Category: Polymer-Based Pulling Lubricant

250 Amp Class T Very-Fast-Acting Fuse, Current-Limiting, 600V, T-Tron

Category: Class T Power Fuses

These GE transformers feature an encapsulated core and coil in a NEMA 3R non-ventilated weatherproof enclosure. UL Listed-C-UL Listed-Knockouts provided on back and bottom-High grade silicon steel core-Mounting holes on side for easy access- Wiring compartment includes ground stud 51B0108

Category: Up To 500 VA Buck-Boost Transformers

Set Screw Coupling, 3-1/2 Inch , Steel, For Use with EMT Conduit, UL 514B, CSA C22.2

Category: Steel EMT Set Screw Couplings

Fork Terminal, Vinyl Insulated, 12 - 10 AWG, #10 Stud, Yellow, Expanded Insulation, 500 {acl

Category: Vinyl Insulated Standard Fork Terminals

Locking Fork Terminal, Vinyl Insulated, Funnel Entry, 22- 18 AWG, #8 Stud Size

Category: Vinyl Insulated Locking Fork Terminals

Modular Led Block - 24VAC, Integrated Led - White - Illuminated

Category: 22mm Front Mount Lamp Blocks

LED Lamp, 8.5 Watt, 120 Volt, Bulb: A19 (Arbitrary), Base: Medium Screw (E26), Lumens: 800, CRI: 80, Color Temperature: 3500K, Lamp Finish: Frosted, Rated Hours: 11000, Note: RP indicates special retail packaging, Standard Case Qty: 6 *Sylvania Part # 79702*

Category: A-Type Traditional LED Lamps

Cable Tie, Light-Heavy Cross Section, 30.5" Long, .300" Wide, .075" Thick, Straight Tip, Weather Resistant UV Rated Nylon, Black, Plenum Rated, 120lb Tensile Strength, 9" Max Bundle Diameter, 50/Pack

Category: Non-Releasable Cable Ties

UF Cable Connector, 2", 4/0 - 3/0 AWG, Die Cast

Category: Zinc Die Cast NM Cable Connectors

I/O Module, Remote, Ethernet, Network Interface Unit, RJ-45 Connector, 175 mA, Backplane Current

Category: PLC Interface Modules

Transformer, Control, Terminal Board Connection, 750 VA, 240 x 480 - 120/240, Open

Category: 500 - 800 VA Industrial Control Transformers

EMT Compression Connector, 3-1/2 Inch, Steel, Concrete Tight, For Use with EMT Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408E, NEMA

Category: Steel Concrete Tight EMT Compression Connectors

Eaton's Bussmann series Multi-pole connector kit, one kit will gang up to 4-poles together, suitable for CH14 and CH22 Modular fuse holders

Category: Miscellaneous Fuse Accessories

4.5" Non-Metallic Round Box with Plugs, Low Voltage Divider and Mud Cover

Category: Round Recessed Floor Boxes

Elbow, 90°, 1/2 Inch, Male, Malleable Iron, Explosion-Proof & Dust-Ignitionproof

Category: Explosion-Proof 90 Degree Male Elbows

Main breaker load centers arrive with a main breaker installed for a convenient and swift install. Main breakers allow for the user to stop the flow of electricity in the load center, shutting off all the power in the residence. The TM815RCUFL features spaces for 8, 1" breakers, a 150A main ampere rating, a copper bus, factory installed feed-through lugs, and an outdoor suitable enclosure.

Category: 1-Phase Main Breaker Copper Bus Load Centers

Neutral/Ground Lug Kit, 6 AWG - 250 MCM, Cu/Al

Category: Load Center Lug Kits