Search results

8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver, Adjustable Length Screwdriver, Shaft Removes To Be Impact Driver Attachment, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

Wire Connector, Color Coded with Flexible Skirt, Color: Blue/Gray, (4) #14, (2) #6, (3) #8, Package of 50. Includes: Internal Square Wire Spring. For Copper-to-Copper Connections Only.

Category: Color Coded Twist On Wire Connectors

Weatherproof Box, 1-Gang, Die Cast. Depth: 2". (4) 1/2" Threaded Outlets (2 in one end, one in other end, 1 in back), Cubic Inches: 17.0". Includes: (2) Closure Plugs & Ground Screw. Gray.

Category: 1-Gang Metallic Weatherproof Boxes

Handy Box Cover, Type: Single Receptacle, Drawn, Metallic. Width: 2-5/16". Length: 4-3/16". Opening: 1.406".

Category: Metallic Handy Box Covers

Threaded Conduit Nipple, 4 Inch x 12 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Mounting Foot Kit (Qty 4), Bulletin A80 (Accessories - Misc.), Size/Dims: fits Concept Enc, Material/Finish: Steel/zinc. ***Used to maintain UL and CSA for exterior mounting***

Category: Enclosure Mounting Bracket Kits

Twirl Nut, size: 3/8-16, Steel/Zinc Plated, Fits Channel Sizes: B22/B24/B26/B32, Steel/Zinc Plated

Category: Strut Channel Nuts

Bridle Ring, 2 Inch Diameter, 1/4-20 Screw Thread, Steel/Electrogalvanized Finish

Category: Plain, Threaded & Wood Screw Bridle Rings

Electrical Color Coding Tape, Vinyl, 1/2 Inch x 20 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, Green

Category: Color Coding Tape

Grounding Bushing, 1-1/4 Inch, 14 - 4 AWG Lay-In Lug, Rated 150° Celsius, Malleable Iron/Zinc Plated Bushing, Aluminum Lay-In Lug Dual Rated CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body, Type X, Diameter 3/4 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type X Iron Conduit Bodies

1-1/4" PVC Conduit Cap.

Category: PVC Conduit Caps

Twister® Pro Wire Connector, 22 - 8 AWG. Red/Tan, Box of 50

Category: Color Coded Twist On Wire Connectors

Rigid Conduit Strap, 1-Hole, 3 Inch, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Switch Box, 1 Gang, Gangable, AC/MC Clamps, TS Bracket, 3 x 2 Inch, Plaster Ears, Welded, Metallic, Depth: 3-1/2 Inch, Side Knockouts: (4) 1/2 Inch, Bottom Knockouts: (1) 1/2 Inch, End Knockouts: (2) 1/2 Inch, Cubic Inches: 18.0

Category: Metallic Switch / Outlet Boxes With Brackets

Male Tab, Fully-Insulated, Material: Nylon, Wire Range: 16 - 14 AWG, Tab Size: .250x.032 Color: Yellow. Package of 50.

Category: Male Nylon Insulated Wire Disconnects

Conduit Locknut, 2-1/2 Inch Diameter, Thin Construction, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Duct Seal, Application: Forms Waterproof, Airtight Seals, Includes: (1) 5 lb Bag

Category: Duct Seal

All Threaded Rod, Zinc-Plated, 1/2-13 Thread x 10 Foot Length

Category: Threaded Rod

1-1/2" PVC Conduit Cap

Category: PVC Conduit Caps

20 Amp, 125 Volt, NEMA 5-20R, 2-Pole, 3-Wire, Heavy Duty Hospital Grade, Duplex Receptacle, Straight Blade, Self Grounding, Back & Side Wired, Steel Strap - Gray

Category: 20 Amp Hospital Grade Duplex Receptacles

Small Enclosure, Type 1, Hinged Cover, Size/Dims: 8" x 8" x 6", Material/Finish: Steel/Gray

Category: Hinge Cover NEMA 1 Junction Boxes

3/8" Strap, 1-Hole, Material: Steel. For use with: Rigid, IMC.

Category: Steel 1-Hole Conduit Straps

1/2" EMT or RIGID Conduit Clamp with retained bold and built-in nut; 1/4" mounting hole. Standard Packaging Quantity: 100.

Category: Conduit Clamps