Search results

Photocell, 15A, 208-277V, 3100-4150W, 1700-2300 VA, Stem Mounting.

Category: Stem Mounted Photo Controls

Eaton Bussmann series FRN-R fuse, 250 Vac, 125 Vdc, 175A, 200 kAIC at 250 Vac, 20 kAIC at 125 Vdc, Non Indicating, Current-limiting, time delay, Blade end X blade end, Class RK5

Category: Class RK5 Fuses

Junction Box, NEMA 12, Hinged Cover, 16 x 14 x 6 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes

VJ Flat Opaque Cover Type 4X, 11.32x9.32x5.4, Lt Gray, FRP, W

Category: Fiberglass Screw Cover Junction Boxes

F20 welding material is primarily used for grounding and bonding applications. It is poured into the mold and ignited with a flint ignitor. Contains approx 115 grams of weld metal and small quantity of starting material.

Category: Traditional Welding Material

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: #2 AWG - 250 MCM. Voltage Range: 5/8kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Panel, 18.20x14.20, Size/Dims: fits 20.00x16.00, Material/Finish: Steel/White.

Category: Enclosure Back Panels

Stepped Baffle Trim, Diameter: 4 inch, Color: White Baffle/White Trim

Category: 4" Baffle Recessed Lighting Trims

Non-Metallic Snap 2 it Liquidtight Connector, 90°, 3/4 inch, UV Rated Plastic, Sealing Ring, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

250 Insulated Female Disconnect, 12-10 AWG, .25 IN W x .032 IN THK Tab, Brazed Seam Barrel, Brass, Yellow

Category: Female Nylon Insulated Wire Disconnects

Fluorescent Lampholder, Miniature Base, T5 Bi-Pin, Snap-In/Slide-On, Lamp-Lock, Low Profile, Quickwire 18AWG Solid/Str Tinned, Panel Locator Post, Color: White.

Category: Screw Mount / Snap-In Fluorescent Lampholders

Sealing Locknut With PVC Molded Seal, 3/4 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

4 Inch Square Box, Welded, Metallic, "CV" Bracket, Depth: 2-1/8 Inch, Side Knockouts: (2) 1/2 Inch, (1) 1/2 Inch and 3/4 Inch Eccentric, Bottom Knockouts: (3) 1/2 Inch, (2) 1/2 Inch and 3/4 Inch Eccentric, End Knockouts: (2) 1/2 Inch, (1) 1/2 Inch and 3/4 Inch Eccentric, Cubic Inches: 30.3

Category: 4" Square Metallic Boxes With Brackets

Features: Physical Dimension 3/4 In Length X 1 3/8 In Diameter, Thread Length 7/16 In , Application: Threadless Rigid Conduit, Standard: Ul 514b, Fed Spec: W-f-408e, NEMA: Fb-1, Size: 0.5in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Rigid Compression Connectors - Iron

30 Amp, 2-Pole, BR Plug-On Circuit Breaker, 10 kAIC, Wire Size #14-4, 120/240 VAC

Category: Residential 2-Pole Circuit Breakers

Service Entrance Cable Connector, 3/4 Inch Diameter, Zinc Die Cast, For USe With NM and SEU Cable

Category: Zinc Die Cast NM Cable Connectors

Modular Pushbutton - Momentary - Flush - Black - Non-Illuminated - Black Plastic - No Contact Block

Category: 22mm Flush Pushbutton Operators

3M™ Temflex™ General Use Vinyl Electrical Tape, High Performance, Black, 3/4 Inch x 60 Feet, 100 Rolls/Case

Category: Premium Professional Use Vinyl Electrical Tape

Fire and Electric Arc Proofing Tape, Scotch, Unprinted. 3" Width, 20' Length. Thickness: 30 mils. Color: Black.

Category: Fire & Electrical Arc Proofing Tape

Cable to Ground Rod, Type: GT, Ground Rod Diameter: 3/4", Conductor Size: 4/0 AWG, Welding Material: 115.

Category: Cable to Ground Bar - Horizontal Tee

Shockwave Compact Magnetic Bit Tip Holder, Length: 3", Diameter: 0.433".

Category: Insert / Power Bit Holders

5" PVC Bell End.

Category: PVC Bell Ends

Vibrating Bell, 120 Volt AC, Diameter: 4", Depth: 2-13-32", 0.062 Amp, 7.4 VA, 88 dB @ 10 ft, Surface Mount,, Color: Gray.

Category: Vibrating Bells

Cable Tie, 14.5", Nylon, Standard Cross Section, Natural, Pack of 1000

Category: Non-Releasable Cable Ties