Wireway Accessories

Divider used to divide CleanTray Straight Section Splice to two sections in washdown applications. This Divider Straight Section Splice CleanTray, CT44DSPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Barrier Kits

Reducer used to reduce to a smaller size CleanTray Wireway. This Reducer CleanTray Sloped Right, CTS6644RRSS item fits 6x6 to 4x4 inches with a material of SS304 finish Brushed.

Category: Wireway Reducers

Wireway Closure Plate, Material: Stainless Steel, Dimensions: 4" x 4"

Category: Wireway Closure Plates

CLOSURE PLATE CABLE ENTRY 500

Category: Wireway Closure Plates

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F22GAGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Tee Fittings

Lay-in Galvanized Panel Adapters are used for securely connecting the wireway to an enclosure. This Panel Adapter, F44GPAGV item measures 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Wireway Panel Adapters

Wireway , Flexible Ftg, Bulletin F25 (fiberglass Type 12 & 3r Wireway And Trough), Size/dims: 4.00x4.00, Material/finish: Rubber/ss

Category: Wireway Cross Fittings

Wireway hanger used to support fiberglass, feed-through wireway. This Wireway Hanger, F44HBEP item fits 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F44TGV item fits 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbow-Tee-Cross Fittings

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F66GAGV item measures 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Wireway Telescope Fittings

Panduct® snap-clip mounting bracket for use with types G,F,FS and D wiring duct, #8-32 x 1/4 (provided) screw required, 2.00" duct width, spring steel, metallic, 100 pc. package quantity.

Category: Wireway Support Hangers

Reducer used to reduce to a smaller size CleanTray Wireway. This Reducer CleanTray Sloped Left, CTS6644RLSS item fits 6x6 to 4x4 inches with a material of SS304 finish Brushed.

Category: Wireway Reducers

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Right Hand CleanTray, CTS44TCRSS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

CleanTray 45-Degree Elbows for 45-degree turns in applications that require frequent washdown. This 45-Deg Elbow Inside Cover CleanTray, CT44EIC45SS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Elbows

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT33SCSS item measures 3.00x3.00 inches with a material of SS304 finish Brushed.

Category: Wireway Panel Adapters

Lay-in Galvanized 90-Deg Elbow-Tee-Crosses used as tee or cross for left or right turns. This 90-Degree Elbow Lay-in-Tee-Cross, F6690TXGV item measures 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Right Hand CleanTray, CTS46TCRSS item measures 4.00x6.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

CleanTray Wireway right-angle installations for two 90-degree turns in frequent washdown areas. This 90-Degree Tee CleanTray, CT33TICSS item measures 3.00x3.00in with a material of SS304 finish Brushed.

Category: Wireway Tee Fittings

Enclosure Adapter securely connects CleanTray Wireway to an enclosure in frequent washdown areas. This Enclosure Adapter CleanTray, CT22AESS item measures 2.00x2.00 inch with a material of SS304 finish Brushed.

Category: Wireway Panel Adapters

Panduct® duct corner strip with 1" bend radius control, 6' lenght for use with all types of PVC wiring duct, cut-to-size 6', light gray.

Category: Wireway Elbows

Lay-in Galvanized 90-Degree Sweep Elbows are used for large-radius turns. This 90-Degree Sweep Elbow Lay-in, F121290SEGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

Wireway hanger used to support fiberglass, feed-through wireway. This Wireway Hanger, F66HBEP item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

90-Degree Wireway Elbow, Front Cover No Tabs, Material: Stainless Steel, Dimensions: 2" x 2"

Category: Wireway Elbows

CleanTray Cross allows wireway cables to route in four directions in frequent washdown areas. This Cross CleanTray, CT44CSS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Wireway Elbow-Tee-Cross Fittings