Wireway Accessories

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections 90-Degree Elbow CW, F22LE9KT item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Feed-Through Swivel Nipples are used for adjusting wireway to different angles. This Swivel Nipple Feed-Through Box Entry, F22WSA item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Wireway Tee, NEMA Type 12, Lay-In, Outside Top Opening, Steel, ANSI 61 Gray Polyester Powder Finish, Size: 2-1/2 x 2-1/2 Inch

Category: Wireway Tee Fittings

Lay-in Painted Galvanized 90-Degree Flush Tees used when flush mounting to vertical surface. This 90-Degree Flush Tee Lay-in, F88T3RT item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F44GA item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Lay-in Painted 90-Deg Elbow with Outside Opening removable top bottom used for 90-degree turns. This 90-Degree Elbow—Outside Opening, F101090EOUT item fits 10.00x10.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Feed-Through Reducer Bushings used for reducing to a smaller wireway size. This Reducer Bushings Feed-Through Edge Hole, F88WRE66 item measures 8x8 to 6x6 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Sweep Tee offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F1010T item fits 10.00x10.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Steel Feed-Through Elbows used for connecting wireway at 45-deg turns in industrial applications. This 45-Degree Elbow Feed-Through, F88WE45 item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F88TGV item fits 8.00x8.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbow-Tee-Cross Fittings

90-Degree Wireway Elbow, Outside Cover, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

Lay-in Galvanized 90-Deg Flush Tees used for flush mounting to a vertical or horizontal surface. This 90-Degree Flush Tee Lay-in, F22GTGV item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

CleanTray 45-Degree Elbows for 45-degree turns in applications that require frequent washdown. This 45-Deg Elbow Perf Top Cover CleanTray, CT44PEFC45SS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Elbows

CleanTray L-Brackets used for supporting a CleanTray run also can mount to a vertical channels. This L-Bracket CleanTray, CT44LB item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Support Hangers

Cableway Tee Component

Category: Wireway Support Hangers

Fiberglass Feed-Through, Cut-off fittings are used for custom fit lengths. This Cutoff Fitting Feed-Through, F44WXFG item measures 4.00x4.00 inches with a material of Fiberglass colored Gray.

Category: Wireway Cutoff Fittings

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F22GSHGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

Layin Galvanized Closure Plates used for closing and sealing the end of a wireway section or run. This Closure Plate, F22GCPNKGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Closure Plates

Wireway 90° Elbow, NEMA Type 1, Lay-In, Outside Opening, Steel, Galvanized, Size: 6" x 6"

Category: Wireway Elbows

90-Degree Elbow, Top Cover Sloped Inward without Tabs, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

FG Feed-Through Flexible Fittings compensate for misalignment and isolates runs from shock vibration. This Flexible Fitting Feed-Through, F66WFFFG item measures 6.00x6.00 inches with a material of SS304, Fits Fiberglass finish Brushed.

Category: Wireway Cross Fittings

Fiberglass Feed-Through Elbows for 45-degree turns in corrosive indoor or outdoor applications. This 45-Degree Elbow Feed-Through, F44WE45FG item measures 4.00x4.00 inches with a material of Gray, Fiberglass colored Gray.

Category: Wireway Elbows

Wireway Elbow, Lay-in Wireway Fittings, Size/Dims: Fits 12" x 12", Material/Finish: Galvanized, Top, Bottom and Outside Covers Removable

Category: Wireway Elbows

Layin Galvanized Closure Plates used for closing and sealing the end of a wireway section or run. This Closure Plate With Knockouts, F22GCPGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Closure Plates