Wireway Accessories

Feed-Through Nipples used between adjacent wireway sections or fittings adjusting wireway length. This Nipple Feed-Through Wireway, F44WN1 item measures 4.00x4.00x1.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F66GA item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Lay-in Painted 90-Deg Elbow with Outside Opening removable top bottom used for 90-degree turns. This 90-Degree Elbow—Outside Opening, F2290EOUT item fits 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Wireway 90° Elbow, NEMA Type 12, Lay-In, Top Opening, Steel, ANSI 61 Gray Acrylic Electrocoat Finish, 2 Inch x 2 Inch.

Category: Wireway Elbows

Wireway Tee Fitting, Top Opening, Size/Dims: 4.00x4.00, Material/Finish: Steel/Gray. For use with Type 12, Wireway .

Category: Wireway Tee Fittings

Wireway Elbow, Flexible Fitting, Feed-Through Type 4X Wireway, 4" x 4", Stainless Steel

Category: Wireway Elbows

Wireway, 3r, 30º Sweep, Bulletin F30g (type 3r Wireway And Trough), Size/dims: Fits 8.00x8.00, Material/finish: Galv/gray

Category: Wireway Elbows

Layin 45-Degree Elbows provide wireway runs with 45-degree turns. Three different elbows available. This 45-Degree Elbow Top Opening, F44LE45A item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Lay-in Painted 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F33G45E item measures 3.00x3.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Feed-Through Reducer Bushings used for reducing to a smaller wireway size. This Reducer Bushings Feed-Through Center Hole, F88WR44 item measures 8x8 to 4x4 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Steel Feed-Through Elbows used for connecting wireway at 45-deg turns in industrial applications. This 45-Degree Elbow Feed-Through, F44WE45 item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Wireway 90° Elbow, Type 1, 10 Inch x 10 Inch, Steel, Gray

Category: Wireway Elbows

Stainless Feed-Through Drop Hangers used for supporting a wireway run in overhead beam or ceiling. This Drop Hanger Feed-Through, F44HDSS item fits 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Support Hangers

Non-Lay-In Cutoff Fittings for custom lengths up to 12in. For shortening lengths and welding. This Cutoff Fitting Non-Lay-in, F126LX item measures 12.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Feed-Through Nipples used between adjacent wireway sections or fittings adjusting wireway length. This Nipple Feed-Through Wireway, F66WN2 item measures 6.00x6.00x2.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Lay-in Painted Galvanized U-Connectors used to join fittings to lay-in wireway straight sections. This U-Connector, F66T3RUC item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway U-Connectors

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections CCW, F22LKOKT item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Transposition Sections

Sweep Tee offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F88T item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Stainless Steel Bracket Hangers support wireway runs in wall, floor or ceiling installations. This Bracket Hanger, F44HBSS item fits 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Support Hangers

Feed-Through Elbows for connecting wireway at 45-degree turns in very wet corrosive applications. This 45-Degree Elbow Feed-Through, F44WE45SS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Elbows

Feed-Through Elbows for connecting wireway at 90-degree turns in a broad range of applications. This 90-Degree Elbow Feed-Through Wireway, F22WE90 item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Feed-Through Telescope Fittings are for easily adjusting wireway lengths without cutting or welding. This Telescope Fitting Feed-Through, F44WA item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Wireway 90° Elbow, NEMA Type 1, Lay-In, Inside Opening, Steel, Gray, Size: 12 x 12 Inch

Category: Wireway Elbows

Lay-in Painted 90-Deg Elbows with removable sides retaining feature elbow orientation. This 90-Degree Elbow Lay-in Wireway, F33G90E item measures 3.00x3.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows