Wireway Accessories

Stainless Steel Box Connectors used inside connected enclosures ensuring tight seal. This Box Connector, F66WBSS item measures 6.00x6.00 inches with a material of SS304 finish Brushed.

Category: Wireway Box Connectors

Wireway, Nipple for Feed-Through Type 4x Wireway, 6 Inch x 6 Inch, Type 304 Stainless Steel

Category: Wireway Nipples

Feed-Through Stainless Gasket and Screws kit are used when additional hardware is needed. This Gasket and Screws Feed-Through, F44WGSS item fits 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Wireway Gaskets

Lay-In Hinged Cover Cutoff Fittings used to create custom lengths 9 to 15in can be shortened welded. This Cutoff Fitting Lay-in, F66LXL item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Cutoff Fittings

Wireway, Reducer/center Hole, Bulletin F20 (feed-through Type 12 Wireway), Size/dims: 8x8 To 6x6, Material/finish: Steel/gray

Category: Wireway Reducers

Layin 45-Degree Elbows provide wireway runs with 45-degree turns. Three different elbows available. This 45-Degree Elbow Inside Opening, F66LE45B item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Painted 90-Degree Elbow-Tee-Crosses can be used as a tee or cross for left or right 90-degree turns. This 90-Degree Elbow-Tee-Cross, F44G90TX item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbow-Tee-Cross Fittings

Feed-Through Telescope Fittings are for easily adjusting wireway lengths without cutting or welding. This Telescope Fitting Feed-Through, F88WA item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Reducers are used to reduce to a smaller wireway size. This Reducer, F88G66R item fits 8x8 to 6x6 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Drop and bracket hangers support a wireway run. This Drop and Bracket Hangers, F22GDB item fits 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

Drop and bracket hangers support a wireway run. This Drop and Bracket Hangers, F1010GDB item fits 10.00x10.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

Feed-Through Reducer Bushings used for reducing to a smaller wireway size. This Reducer Bushings Feed-Through Edge Hole, F88WRE66 item measures 8x8 to 6x6 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Steel Feed-Through Elbows used for connecting wireway at 45-deg turns in industrial applications. This 45-Degree Elbow Feed-Through, F88WE45 item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Reducers are used to reduce to a smaller wireway size. This Reducer, F1212G88R item fits 12x12 to 8x8 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Service Entrance Barrier Kit for K and L Frame with SEK4/6. H x L x W: 16 Inch x 8 Inch x 6 Inch.

Category: Wireway Barrier Kits

Lay-in Galvanized 90-Deg Flush Tees used for flush mounting to a vertical or horizontal surface. This 90-Degree Flush Tee Lay-in, F66GTGV item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Fiberglass Feed-Through Elbows for 90-degree turns in corrosive indoor or outdoor applications. This 90-Degree Elbow Feed-Through Wireway, F44WE90FG item measures 4.00x4.00 inches with a material of Fiberglass colored Gray.

Category: Wireway Elbows

Bracket, For 3/8" Threaded Rod to 1-1/2" to 2" Ladder Rack, Fiber-Duct

Category: Wireway Support Hangers

Lay-in Galvanized Panel Adapters are used for securely connecting the wireway to an enclosure. This Panel Adapter, F1212GPAGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Panel Adapters

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F44GSHGV item measures 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

Lay-in Galvanized 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F121245EGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

Lay-in Galvanized 90-Deg Flush Tees used for flush mounting to a vertical or horizontal surface. This 90-Degree Flush Tee Lay-in, F44GTGV item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

CIR 1010 GFGV GALV WIREWAY EN

Category: Wireway Panel Adapters

Wireway Closure Plate, 6 x 4 Inch, Type 1, Steel, Painted Gray, No Knockout

Category: Wireway Closure Plates