Wire Duct, Wire Trough, Wireway

Wiresafe Fitting, 4 Inches x 4 Inches, 90 Degree Bend, External Clip-on cover

Category: Wireway Elbows

Corner Wiring Duct, Base Only, 5.33" W x 4.58" H x 6' Long, Lead Free PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Wiring Duct Wide Slot, 0.75 Inch x 1.5 Inches, Gray PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Wiring Duct Round Hole, 1.5 Inches x 4 Inches, Gray PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Wiring Duct Solid Wall, 0.75 inch x 1 Inch, Gray PVC

Category: High Density Wire Duct

Wiring Duct Wide Slot, 2 Inches x 3 Inches, White PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type G wide slot wiring duct, 4 W x 1.5 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wiring Duct Narrow Slot, 1 Inch x 1 Inch, Gray PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Screw-Cover Wiring Trough used for outdoor corrosive applications when frequent access is not needed. This Screw Cover Wiring Trough NEMA Type 4X, F6648SCSS item measures 6.00x6.00x48.00 inches with a material of SS304 finish Brushed.

Category: NEMA 4X Wire Trough

Panduct® type G wide slot wiring duct, 2 W x 1.5 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 1.5 W x 3 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Wiring Trough, NEMA Type 12, Hinged Cover, 4" x 4" x 18", Steel, Gray

Category: NEMA 12 Wire Trough

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections 90-Degree Elbow CW, F88LE9KT item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

High Density Slotted Wall Wiring Duct, 3" x 2", Non-Adhesive, PVC, White, 120ft/Carton ***Cover Sold Separately***

Category: High Density Wire Duct

Lay-In Hinged Cover Cutoff Fittings used to create custom lengths 9 to 15in can be shortened welded. This Cutoff Fitting Lay-in, F22LXL item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Cutoff Fittings

Wide Slot Wire Duct. W x D x L: 15" x 2" x 6'. Color: White. Material: PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT ***Item does not include Cover***

Category: High Density Wire Duct

Lay-In Galvanized Wireway, Straight Section, NEMA Type 1, Dimensions: 10" x 10" x 12"

Category: Screw Cover Wireway

Layin 45-Degree Elbows provide wireway runs with 45-degree turns. Three different elbows available. This 45-Degree Elbow Inside Opening, F22LE45B item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Lay-In Hinged Cover Reducer for reducing to a smaller wireway size. This Reducer Lay-in Hinged Cover, F126LRE66 item fits 12x6 to 6x6 inches with a material of Steel colored Gray.

Category: Wireway Reducers

Wire Trough, Hinged Cover, Bulletin F20hc (type 12 Hinged Cover Trough), Size/dims: 2.50x2.50x12.00, Material/finish: Steel/gray

Category: NEMA 12 Wire Trough

Lay-in Cross Fittings for routing cables in 4 directions where 4 branches are open on the same side. This Cross Fitting Lay-in Hinged-Cover, F66LC item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Cross Fittings

Lay-in Painted Galvanized 90-Degree Elbows are used whenever a right-angle installation is needed. This 90-Degree Elbow Lay-in Wireway, F44T3R90E item measures fits 4.00x4.00 inches with a material of Steel finish Gray.

Category: Wireway Elbows

Feed-Through Tees used for making T-type turns in wireway runs. This Tee Feed-Through, F22WT item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Painted 90-Degree Elbow-Tee-Crosses can be used as a tee or cross for left or right 90-degree turns. This 90-Degree Elbow-Tee-Cross, F22G90TX item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Elbows