Wire Duct, Wire Trough, Wireway

Screw-Cover Wiring Trough Type 1 used for indoor applications protecting against dirt or moist. This Wiring Trough NEMA Type 1, A6672T1T item measures 6.00x6.00x72.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

Wireway, 90° Elbow/transpo Ftg, Ccw, Bulletin F10 (lay-in Type 12 Wireway), Size/dims:8.00x8.00, Material/finish: Steel/gray

Category: Wireway Elbows

Transposition Sections CW, 4" x 4", Steel, Gray

Category: Wireway Transposition Sections

Wireway 90° Elbow, NEMA Type 12, Lay-In, Counterclockwise Opening, Steel, ANSI 61 Gray Acrylic Electrocoat Finish, Size: 4 x 4 Inch

Category: Wireway Elbows

Lay-in Hinged Cover Nipples are used for adjusting wireway length. This Nipple Lay-in Hinged-Cover, F44LN1 item measures 4.00x4.00x1.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Feed-Through Swivel Nipples are used for adjusting wireway to different angles. This Swivel Nipple Feed-Through, F66WSC item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Wireway, Type 1, Straight Section, Hinged, Size/Dims: 12" x 12" x 24", Material/Finish: Steel/Gray

Category: Hinged Cover Wireway

Lay-in 90-Degree Elbow Outside Top Opening used for 90-deg turns in vertical drops. This 90-Degree Elbow Outside Top Opening, F66LE9AC item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

THB TYD2X5NPG6 , SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Halogen Free Slotted Wiring Duct, 1-1/2" x 2" x 6', White, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Solid Wall Wiring Duct, 3" x 3", Non-Adhesive, PVC, White, 120ft/Carton

Category: Standard Density Wire Duct

Plastic Wiring Duct Cover, 1 Inch, Intrinsic Blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Wire Safe Fitting - 6 Inches X 6 Inches 90 Degree Bend, Internal Cover, Clip-on

Category: Wireway Elbows

Lay-in Painted Galvanized Wall Hangers are used to support a wireway run. This Wall Hanger, F66T3RWH item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

THB TYD4CPI6 , SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Support hangers are used for wireway floor or wall installations. This Support Hanger, F88GSH item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Panel Adapters

Lay-in Painted 90-Deg Flush Tees used for flush mounting against a vertical or horizontal surface. This 90-Degree Flush Tee, F33GT item measures 3.00x3.00 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Steel Feed-Through Cut-off fittings for custom fit lengths in different industrial applications. This Cutoff Fitting Feed-Through, F88WX item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Cutoff Fittings

Reducers are used to reduce to a smaller wireway size. This Reducer, F44G33R item fits 4x4 to 3x3 inches with a material of Steel colored Gray.

Category: Wireway Reducers

THB TYD25CPW6 , SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Feed-Through Reducer Bushings used for reducing to a smaller wireway size. This Reducer Bushings Feed-Through Edge Hole, F88WRE44 item measures 8x8 to 4x4 inches with a material of Steel colored Gray.

Category: Wireway Closure Plates

Ww, Type 1, Straight Section, Bulletin F40fc (painted Type 1 Lay-in Wireway, Flat Cover), Size/dims: 12.00x12.00x12.00, Material/finish: Galv/gray

Category: Screw Cover Wireway

Cross Fittings are used when there are four branches of wireway. This Cross Fitting, F88X item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Cross Fittings

Wiring Duct Wide Slot, 1 Inch x 1 Inch, White PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct