Splicing & Terminating Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 2/0 AWG - 1/0 AWG, Motor Lead Range: 4 AWG - 1/0 AWG. Voltage Range: 5-8KV, Connection Type: 2-Hole Lug (Pigtail). Includes: 3 Packs of Cleaning Pads. ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Street Lighting Kit, Dual and Fused, Voltage Rating: 600 V, Amperage Rating: 1/10 - 30 Amp, Line Side Cable Size: 12, 10, 8, 6 Awg, Line Side Crimp Type: Copper, Line Side Insulation Diameter: 0.120 - 0.430 Inch, Load Side Cable Size: 12 - 6 Awg, Load Side Crimp Type: Copper, Load Side Insulation Diameter: 0.120 - 0.430 Inch

Category: Streetlight Breakaway Y-Tap Kits

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 10 AWG - 2 AWG, Maximum Conductor O.D.: 0.750", Maximum Connector O.D.: 0.406". For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Cold Shrink QS-III Silicone Rubber Splice Kit 69 kV 5488A, 5488A-JCN-XB, and 5488A-Shielded-XB, For Jacketed Concentric Neutral (JCN), Tape-Shield, Longitudinally- Corrugated (LC) Shielded, Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Power Cables

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 350 MCM - 750 MCM. Cable Insulation Range Size: 1.04" - 1.70", Connector Requirements: Minimum O.D.: 0.80", Maximum O.D.: 1.84", Maximum Length: AL/CU 6.75", Copper 7.5".

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Termination Kit QT-III Series, 700 - 2000 MCM, 5 - 35 kV, Cable Range 1.530 - 2.320 Inch, Silicone Rubber, 1 Termination Per Kit, For Use With Concentric Neutral Cable, Jacketed Concentric Neutral Cable, Longitudinally Corrugated Cable and Tape Shield Cable

Category: Medium Voltage Cold Shrink Splice Kits

Deadbreak Equipment Connection Kit, 600A, 35kV, Maximun Outer Diameter 1.175 Inch, For Use With Jacketed Concentric Cable

Category: T-Body Deadbreak Connectors

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 1000V, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Deadbreak Component Plug, 600 Amp, 35kV

Category: Loadbreak / Deadbreak Plugs

Splice Kit, Cold Shrink, 5/8 kV, Non-shielded cable, Conductor Range: 2 AWG - 300 MCM. Maximum connector length: 4.25".

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink QT-III Silicone Rubber Skirted Termination Kit, 7640-S 7650-S & 7660-S Series, 5 - 35kV, 1.530 - 2.320 Inch Cable Insulation Diameter, Indoor/Outdoor, 1 Kit/Case

Category: Medium Voltage Cold Shrink Splice Kits

Mine & Portable Cable Splice Kit, 5/8kV Type: SHD-GC 4/0 AWG to 500 MCM, Type: MPF-GC & MPF: 250 to 500 MCM, 15kV Type SHD-GC: 1/0 AWG to 500 MCM, Type MPF-GC & MPF: 1/0 to 500 MCM. Kit Includes (3) Funnels, (1) Wrap-Around Splice Mold, (3) Rubber Mold Straps, (3) Funnel Supports, (4) Spacer Webs, (1) Strip 3M™ Three-M-Ite™ Elek-Tro-Cut™ Abrasive Cloth, 80J Grit, (13) Size C Bags, 3M™ Scothcast™ Flame Reatardant Compound 2131

Category: Medium Voltage Cold Shrink Splice Kits

MMM RJS-4-4FT 3M(TM) REJACKETING SLEEVE RJS-4-4FT 4FT COIL 10 PER CASE

Category: Cable Rejacketing Sleeves

Insulation Piercing Connector 750 MCM - 3/0 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.

Category: Splices - Insulation Piercing

Breakaway Streetlight Kit, In-Line Non-Fused, Neutral

Category: Streetlight Breakaway Y-Tap Kits

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for #6 to 1/0 AWG Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Wrap-Around UF Splice Kit for 14/2 - 8/3 with Ground Easy-Splice Wrap-Around UF Splice Kit provides a quick and convenient method of splicing underground feeder (UF) cable. Convenient wrap-around design and fast installation. No heating or waiting for compounds to cure. The unique sealing gel entirely encapsulates the splice, completely sealing out moisture and other contaminants. Kit includes connector and closure. Rated for 600V applications.

Category: Low Voltage Gel Filled Splice Kits

insulation Piercing Connector 350-1/0 Main, 350-1/0 Tap

Category: Splices - Insulation Piercing

Deadbreak Adapter, 35kV, 1/Box 1.355" - 1.520" (34.4 - 38.6), Black

Category: Loadbreak / Deadbreak Cable Adapters

IDE D65PN-U LV KIT

Category: Streetlight Breakaway Y-Tap Kits

Deadbreak Shearbolt Lug SB1, 2-250kcmil,1/Box

Category: Loadbreak / Deadbreak Accessories

Deadbreak Component, Aluminum Stud, 5/8"-11 UNC Threaded, 1/Box

Category: Loadbreak / Deadbreak Accessories

Crimpit™ H-Tap Cover, Flame Retardant, 250 kcmil Max Conductor, 0.95" Max Connector Length, Purple

Category: Low Voltage Direct Burial Splice Kits

Insulation Piercing Connector, Main Conductor Range: 8 AWG - 1/0 AWG, Tap Conductor Range: 10 AWG - 2 AWG, Voltage: 600V, Copper Current Rating: 190 Amp, Aluminum Current Rating: 150 Amp.

Category: Splices - Insulation Piercing