Splicing & Terminating Kits

Mine and Portable Splice Kit, Cold Shrink, 5/8/15 kV, Non-Shielded, Wire Range: 1/0 - 300 MCM.

Category: Medium Voltage Cold Shrink Splice Kits

7100248396 DEADBREAK EQUIPMENT CONNECTION KIT 635EMSB2 600A 35 KV 1KIT/BOX

Category: T-Body Deadbreak Connectors

3m(tm) Cold Shrink Qs-iii Splice Kit 5513a-1/0-cu, 1/0 Awg, 1 Per Case

Category: Medium Voltage Cold Shrink Splice Kits

ASI 53435-1 AMPOWER QUICK DISC 500MCM

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Push-On Gel Stub Splice Kit, 2 - 4/0 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Push On Gel Stub Splice Kit, 8 - 2 AWG

Category: Low Voltage Gel Filled Splice Kits

Fast-drying, waterproof, synthetic rubber and resin-based adhesive. The M1 adhesive comes is grey and is 10.1 oz (0.3 L).

Category: Insulating & Sealing Compound

Insulation Piercing Connector, 4/0 AWG - 350 MCM (Run-Tap), 600V

Category: Splices - Insulation Piercing

Easy-Splice Push On Gel Stub Splice Kit, 16 - 10 AWG

Category: Low Voltage Gel Filled Splice Kits

Rejacketing Sleeve, 25kV or Less, Shield Diameter Range: 0.80 - 1.02 Inch, 10 Foot Coil, Rejacketing Sleeves are Designed To Be Used In Conjunction With 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.

Category: Cable Rejacketing Sleeves

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

Mechanical Shearbolt Lug, 2-hole, Conductor Range: 350 MCM – 750 MCM. Will Terminate Either Aluminum and/or Copper Conductors.

Category: Loadbreak / Deadbreak Crimp Connectors

Mechanical Shearbolt Lug, 2-hole, Conductor Range: 1/0 AWG-350 MCM. Will Terminate Either Aluminum and/or Copper Conductors.

Category: Loadbreak / Deadbreak Crimp Connectors

Mechanical Shearbolt Lug, 2-hole, Conductor Range: 2 AWG-250 MCM. Will Terminate Either Aluminum and/or Copper Conductors.

Category: Loadbreak / Deadbreak Crimp Connectors

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG. Provides Abrasion Resistance and Moisture Ingress for 14/3 without ground thru 8/3 with ground in Direct Burial Applications.

Category: Low Voltage Heat Shrink Splice Kits

Flexible Power Cable Inline Splicing Kit, Diameter: 0.80 - 1.20 Inch, Rated 1kV/5kV, 2/0 - 4/0 AWG, For Use With Non-Shielded Single/Multiple Conductor Portable Ca

Category: Non-Shielded Resin Splices

Watertight Underground Splice Kit, 8 - 2 AWG, (2) Heat Shrink Sleeves, Dual Rated for Copper and Aluminum

Category: Direct Burial Datacom Splice Kits

In-line Resin Splicing Kit, Non-Shielded, Conductor Range: 6 to 1/0 AWG, Maximum Conductor O.D.:0.80 Inch, Minum Conductor O.D.: 0.25 Inch, For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Electrical Insulating Resin, 4N Series, 14.6 Ounce

Category: Insulating & Sealing Compound

Resin, Electrical Insulating, 4.8 cubic inches, 3.2 ounce Package. Resin is a 2-Part Epoxy Insulating and Encapsulating Resin. Use to Splice Solid Dielectric and Oil-Filled Cables up to 8 kV.

Category: Insulating & Sealing Compound

Resin, Electrical Insulating, 11.2 cubic inches, 7.4 ounce Package. Resin is a 2-Part Epoxy Insulating and Encapsulating Resin. Use to Splice Solid Dielectric and Oil-Filled Cables up to 8 kV.

Category: Insulating & Sealing Compound

Insulation Piercing Connector, Main 4/0 - 1/0 AWG, Tap 1/0 - 6 AWG

Category: Splices - Insulation Piercing

Resin, Flame Retardant Compound. Resin is a 2-Part Epoxy Insulating and Encapsulating Resin. For use to Replace the Jacket when Splicing or Repairing Mine Portable Cable and Secondary Underground Splices.

Category: Insulating & Sealing Compound