Splicing & Terminating Kits

RCH MOD-3A-HVT

Category: Medium Voltage Heat Shrink Splice Kits

Insulation Piercing Connector, A Main Conductor Range: 8 AWG - 1/0 AWG, Tap Conductor Range: 8 AWG - 2 AWG., Voltage: 600V, Copper Current Rating: 190 Amp, Aluminum Current Rating: 150 Amp, Bolt Head Size: 1/2".

Category: Splices - Insulation Piercing

Inline Splice, CSJA Series, Cold Applied Type, 15 kV - 35 kV, For Use With Splice Tape Shield, Wire Shield, LC Shield, UniShield, JCN and Flat Strap Shielded Cables

Category: Medium Voltage Cold Shrink Splice Kits

Heat Shrink Shielded Cable Termination, 8kV, Indoor, 0.893 - 1.526 Inch Insulation Diameter, Plastic With Tape Shield

Category: Medium Voltage Heat Shrink Splice Kits

RCH HVT-Z-253/353-SG HIGH VOLTAGE TERMINATOR

Category: Medium Voltage Heat Shrink Splice Kits

UF SPLICE KIT FOR DIRECT BURIAL 14AWG TO 8AWG

Category: Low Voltage Direct Burial Splice Kits

RCH HVS-1522S 15KV SPLICE

Category: Medium Voltage Heat Shrink Splice Kits

Low Voltage Splice Kit, 3 Conductor, 2-1/0 AWG, 600V, For Use With Armored Cable, 1 Per Case

Category: Low Voltage Cold Seal Splice Kits

Resin Splice Kit, Multi-Mold, 600V, Maximum Conductor: 8 AWG (Split Bolt), 4 AWG (H & C Tap Compression). Kit Includes: Mold Body, Sealing Mastic, Scotchcast Resin 4 and Adhesive Film Strip.

Category: Non-Shielded Resin Splices

Insulation Piercing Connector, 4/0 AWG - 350 MCM (Run), 10 - 4/0 AWG (Tap), 600V

Category: Splices - Insulation Piercing

PRYS AGT3CA15 2-2/0 15KV COLD SHRINK TERMINATION KIT

Category: Medium Voltage Cold Shrink Splice Kits

Heat Shrink Inline Cable Splice Kit, Medium Voltage, 15kV, 500 - 700 MCM, 1 Conductor

Category: Medium Voltage Heat Shrink Splice Kits

RCH HVS-3-1523S 101147-000 15KV SPLICE 3/C

Category: Medium Voltage Heat Shrink Splice Kits

Motor Stub Splice Insulator 12 - 8 AWG, Bolt Max Length 3/8 Inch

Category: Medium Voltage Motor Lead Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - #2 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Deadbreak Shearbolt Lug, 350-750kcmil,1/Box

Category: Loadbreak / Deadbreak Accessories

Re-Enterable Insulating & Sealing Compound, Size D, 21.2 Ounce, 40.6 Cubic Inches. For Use After Re-Entering

Category: Insulating & Sealing Compound

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Rejacketing Sleeve, 25kV or Less, Shield Diameter Range: 0.80 - 1.02 Inch, 10 Foot Coil, Rejacketing Sleeves are Designed To Be Used In Conjunction With 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.

Category: Cable Rejacketing Sleeves

B-TAP® Insulation Piercing Tape Connector, 2 Ports, 600V, Run 250-4, Tap 4/0-6, Black

Category: Splices - Insulation Piercing

Motor Lead Pigtail for Shielded Cable, 250 - 500 MCM Feeder, 4/0 - 500 Motor Lead, For Use in 5kV to 8kV Applications, Copper Lugs Only

Category: Medium Voltage Motor Lead Splice Kits

Cold Shrink Termination Kit QT-III Series, 700 - 2000 MCM, 5 - 35 kV, Cable Range 1.530 - 2.320 Inch, Silicone Rubber, 1 Termination Per Kit, For Use With Concentric Neutral Cable, Jacketed Concentric Neutral Cable, Longitudinally Corrugated Cable and Tape Shield Cable

Category: Medium Voltage Cold Shrink Splice Kits

250 - 4/0 AWG Main, 4/0 - 6 AWG Tap, 600V, Insulation Piercing Connector

Category: Splices - Insulation Piercing

Deadbreak Adapter 635CAN, 35kV,1/Box 1.485" - 1.595" (37.7 - 40.5)

Category: Loadbreak / Deadbreak Cable Adapters