Splicing & Terminating Kits

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 2 AWG - 3/0 AWG, Maximum Conductor O.D.: 1.000", Maximum Connector O.D.: .625". For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Mechanical Shearbolt Lug, 2-hole, Conductor Range: 500 MCM – 1000 MCM. Will Terminate Either Aluminum and/or Copper Conductors.

Category: Loadbreak / Deadbreak Crimp Connectors

Cold Shrink QT-III Termination Kit, 5 - 35 kV, 1 AWG - 500 MCM, Cable Range 0.720 - 1.290 Inch Cable Range, For Use With Tape/Wire/UniShield Shielding, Indoor, Includes (3) Termination Lugs and Stainless Steel Hardware, Silicone Rubber

Category: Medium Voltage Cold Shrink Splice Kits

Insulation Piercing Connector Kit, Cable Run 4/0 - 500 MCM, Taps 14-16 AWG, 1kV Rated, Polyamide Housing With Elastomeric Polymer Insulator

Category: Splices - Insulation Piercing

Inline Splice Kit, Cold Shrink, 35 kV, Shielded Cable, Conductor Range: 1/0 AWG - 350 MCM. Cable Insulation Range Size: 1.070 - 1.70 Inch

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 4/0 AWG - 500 MCM. Cable Insulation Range Size: 0.84" - 1.38", Connector Requirements: Minimum O.D.: 0.69", Maximum O.D.: 1.38", Maximum Length: AL/CU 5", Copper 5.75".

Category: Medium Voltage Cold Shrink Splice Kits

Rejacketing Sleeve, 15kV or Less, Shield Diameter Range: 0.60 - 0.80 Inch, 10 Foot Coil, Rejacketing Sleeves are Designed To Be Used In Conjunction With 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.

Category: Cable Rejacketing Sleeves

Inline Splice Kit, Cold Shrink, 35 kV, Shielded Cable, Conductor Range: 1/0 AWG - 350 MCM. Maximum Connector Length: Copper 6.50" or Aluminum 6.00"

Category: Medium Voltage Cold Shrink Splice Kits

Deadbreak Elbow Connection Kit, 600 Amp, 35kV, 635 Series Includes: T-Body, 600A, 35kV with Test Point (1), Dead End Plug with Cap (1), AL Stud, 35kV (1), Compression Connector or Shearbolt Lug (1), Copper Tape Strip (1), Cable Adapter (1), 3M Cold Shrink Jacketing Tube (1), Ground Braid Assembly (1), Bleeder Wire for use on JCN and Flat Strap Cable (1), Constant Force Spring (1), Mastic Sealing Strips (2), Silicone Lubricants (4), 3M Cable Cleaning Kit CC-2 (1), Instruction Sheet (1)

Category: T-Body Deadbreak Connectors

Cold Shrink Inline Splice Kit, 5730 Series, 3 or 4 Conductor, 14 - 10 AWG, 600 Volt, Includes 1 Roll of 3M Sheath Wrap

Category: Low Voltage Cold Seal Splice Kits

Cold Shrink Splice Kit, 3 Conductor, For Armored/Non-Armored Cable, 5/8kV, Conductor Size: 3/0 AWG - 250 MCM, Insulation O.D. Range: 0.64 - 1.01 Inch, Splice Length: 52 Inch. Kits Include Material Necessary to Make (1) 3-Conductor Splice. Connectors Are Not Included and Must be Ordered Separately. The Completed Splice is Designed for Use in Cable Trays, Weather Exposed or Direct Burial Locations.

Category: Medium Voltage Cold Shrink Splice Kits

3M RJS-1-1FT REJACKETING SLE

Category: Cable Rejacketing Sleeves

7000133716 3M SCOTCHCAST ELECTRICAL RESIN 241 14LB

Category: Insulating & Sealing Compound

Splice Kit, Cold Shrink, 35 kV, Works with Various Types of Shielded Cables, Conductor Range: 350 MCM - 1000 MCM. Cable Insulation Range Size: 1.24" - 2.07". Connector Requirements: Minimum O.D.: 0.87", Maximum O.D.: 2.07", Maximum Length: AL/CU 7.50", Copper 8.25"

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Inline Cable Splice Kit, QS-III Series, 15 kV, 1 Conductor, Insulation Outside Diameter 1.040 - 1.700 Inch, 1 AWG - 750 MCM, For Use With Cooper and Aluminum Shielded Cables, Black

Category: Medium Voltage Cold Shrink Splice Kits

215LB403B Loadbreak Kit with Compression Lug, 200A, 15 kV

Category: Loadbreak / Deadbreak Accessories

Deadbreak Connection Kit, 900A, 35kV

Category: T-Body Deadbreak Connectors

Splice Kit, Cold Shrink, 5/8 kV, Shielded or Non-shielded Cable, Conductor Range: Cooper 500 - 1000 MCM, Aluminum 500 - 1000 MCM, Maximum Connector Length: Copper 43 Inch, Aluminum

Category: Medium Voltage Cold Shrink Splice Kits

Rubber Splice Kit, Cold Shrink, 5/8 kV, Shielded and Non-Shielded Cable, Conductor Range: 6 - 4/0 AWG Copper or 6 3/0 AWG Aluminum. Cable Insulation Range Size: 0.45" - 0.88".

Category: Medium Voltage Cold Shrink Splice Kits

7100248396 DEADBREAK EQUIPMENT CONNECTION KIT 635EMSB2 600A 35 KV 1KIT/BOX

Category: T-Body Deadbreak Connectors

Deadbreak Component, Reducing Tap Plug, 35 kV, 600 Amp, Compatible Deadbreak and/or Loadbreak Elbows, Fully Shielded for Terminating and Connecting Applications, 1/Box

Category: Loadbreak / Deadbreak Plugs

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Conductor Range: 1 AWG - 250 MCM. Cable Insulation Range Size: 0.84" - 1.36", Connector Requirements: Minimum O.D.: 0.46", Maximum O.D.: 1.36", Maximum Length: AL/CU 4.00", Copper: 4.50".

Category: Medium Voltage Cold Shrink Splice Kits

Modular Tap Splice Kit, Conductor Range: 2 AWG - 750 MCM (Copper); Conductor Range: 2 AWG - 1000 MCM (Aluminum), 5 -25 kV, 600 Amp, Each Kit Contains: 2 Tee-Modules, 1 Connecting Plug, 2 Dead-End Plugs, 2 Connecting Stud, 1 Instruction Booklet and Silicone Lubricant, Required: (1) Cable Adapter Kit.

Category: Medium Voltage Cold Shrink Splice Kits