Search results

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 2.19 IN Outside Diameter, 1.37 IN Inside Diameter, 1-1/4 X 1 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Elbow, 90°, 3/4 Inch, Female/Female, Explosion-Proof, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Explosion-Proof 90 Degree Female Elbows

OZ-Gedney Clip-On 170 Series Cover, 1-1/2 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CS

Category: Steel Conduit Body Covers

OZ-Gedney Type SUBC Right Angle Conduit Clamp, 2 IN Cable, Cable Type: Rigid Conduit, IMC, EMT, Malleable Iron, Steel Nuts And Bolts, Finish: Clamp: Hot Dip Galvanized, Hardware: Mechanically Galvanized, For Securing Rigid Conduit, IMC or EMT Cond

Category: Malleable Iron EMT Right Angle Type K-Clamps

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3/8 IN (1/2 IN KO), Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 1-1/8 IN Width, 1-1/2 IN Height, Th

Category: Malleable Iron Liquidtight Flex Connectors

OZG LL200ATW 2" LL SSCR COND

Category: Type LL Iron Conduit Bodies

AC/Flex Connector, 2-Screw, Clamp, 1/2 Inch (3/4 KO), Malleable Iron

Category: Straight Squeeze Flex Connectors

Cord Connector, Liquidtight, 1-1/2 Inch, 1.375 - 1.75 Range, Iron

Category: Straight Malleable Iron Cord Grips

Liquidtight Connector with Wire Mesh Grips, Insulated, Straight, Size: 1-1/2 Inch, Material/Finish: Malleable Iron/Zinc

Category: Liquidtight Connectors - Accessories

OZ-Gedney Type ABG Specification Grade Ground Connector, Conductor Size: 2/0 AWG - 250 KCMIL, Length: 2 IN, Size: Ground Rod Size: 5/8 IN Or 3/4 IN, Ground Pipe Size: 3/8 IN, Copper Alloy, 1-7/8 IN Height, 2-5/8 IN Width, Third Party Certificatio

Category: Bare Wire Ground Clamps

Sealing Fitting, Female/Female, Vertical/Horizontal, Size: 1 Inch, Aluminum

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 2 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

OZ-Gedney Type RB Reducing Bushing, Size: 3-1/2 X 2-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-3/8 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2,

Category: Iron Alloy Reducing Bushings

Grounding Bushing, 3/4 Inch, Threaded, Insulated, 14 to 4 AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Oz-g Me325s 1mx1-1/4f Cond conn

Category: Conduit Enlargers

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2-1/2 IN, 3-5/8 IN Outside Diameter, Connection: MNPS, 1-1/4 IN Thread Length, Flange Thickness: 3/8 IN, Third Party Certification: UL File Number E-1185

Category: Iron Chase Nipples

OZ-Gedney Type 4Q-G Liquidtight Sealing Ring Assembly, Trade Size: 3 IN, Steel Retaining Ring, Neoprene Gasket, Finish: Zinc Electroplated, For Providing A Positive Seal Between Shoulder Of Fitting And Enclosure

Category: Liquidtight Connectors - Accessories

OZ-Gedney BS-A Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 5

Category: Aluminum Conduit Body Covers

OZ-Gedney Clip-On 170 Series Cover, 3/4 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA

Category: Steel Conduit Body Covers

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 3-1/4 IN Width, 2-1/8 IN He

Category: Malleable Iron Liquidtight Flex Connectors

Reducing Washer, Steel, 1-1/2" x 3/4"

Category: Reducing Washers

OZ-Gedney Spec 5 Type X Conduit Body, 3/4 IN Hub, Length: 6-1/8 IN, 3-1/8 IN Width, 1-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, Third Party Certification: UL File Number E-18095, CSA LR-

Category: Type X Iron Conduit Bodies

OZ-Gedney Type RB Reducing Bushing, Size: 3 X 2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/4 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 1/2, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 1/2-14 Tapered FNPT, Dimensions: 1-1/2 IN Diameter X 1-3/8 IN Length, Box Wall Thickness: 7/32 IN, Third Party Certification: UL

Category: Malleable Iron Conduit Hubs With Grounding