"the thomas"

3-1/2IN STAMPED STEEL CVR

Category: PVC Coated Conduit Body Covers

3-Piece Coupling Female-Female Explosionproof Conduit Union, 1 IN, Die Cast Aluminum, Alum Lacquered

The SolarEdge Cellular kit enables Internet connectivity from the StorEdge inverter to the SolarEdge Cloud-Based Monitoring Platform with no need to rely on the homeowner’s internet connection. The cellular modem can be installed directly inside the SolarEdge StorEdge inverter and connected to an external antenna, simplifying the communication set up and saving installation time. 5 year prepaid plan.

Category: Solar Inverter Cellular Modems

The next generation in our 10Gig Termination System combines two crimpers into a single tool, making 2-step crimping simple. First, insert the 10Gig connector into the front end to terminate the contacts and switch to the back end to crimp the external ground. Like the original, the new Tele-TitanXg 2.0, along with our 10Gig shielded connectors, are engineered specifically for CAT6A cables to provide true 10Gig performance each and every time., 849160007975

Category: Datacom Crimp Tools

Terminal boxes JB, Stainless steel, material: Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal, Enclosure: Stainless steel 1.4301 (AISI 304), surface: Enclosure and door: Brushed, grain 240, supply includes: 180¦ hinge, description: The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Reinforcement bracket, for TS, SE, TP universal console, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For use as an additional stabiliser to the clamping straps when populated enclosures are screw-fastened via the base tray to the base/plinth or pallet for transportation purposes. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Snap-on nut TS, material: Precision-cast stainless steel, description: For mounting on the vertical TS/SE enclosure section. By tightening the screw, it is securely tightened against the section, and potential equalisation is automatically created. Packaging Unit: 20 pc(s).

Category: Rack Mounting Screws

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right.

Category: Cordless Heavy Duty Jig Saws

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

3-1/2" Diameter, Old Work Ceiling/Fixture Box, Phenolic, Depth: 2-1/8. Cubic Inches: 14". Includes: High Clamps. New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

3-1/2" Diameter, Ceiling/Fixture Pan, Phenolic, Depth: 5/8". Cubic Inches: 3.5". New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Ceiling Pans

The SolarEdge Cellular Kit Enables Internet Connectivity from the Inverter to the SolarEdge Cloud-Based Monitoring Platform with No Need to Rely on the HomeownerGÇÖs Internet Connection. The Cellular Modem Can Be Installed Directly Inside the SolarEdge Inverter and Connected to an External Antenna, Simplifying the Communication Set Up and Saving Installation Time. 12 Year Prepaid Plan.

Category: Solar Monitoring Accessories

3-1/2" Diameter, Old Work Ceiling/Fixture Box with Brackets, Phenolic, Depth: 2-1/8". Cubic Inches: 14", Fixture Weight: 15 lbs. Includes: #9 Snap-In Bracket, High Clamps, #40 Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

4" Diameter, Nail-On, Ceiling/Fixture Box with "N" Bracket, Phenolic, Depth: 1-5/8", Cubic Inches: 13.5", Includes: Nails, Clamps, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 3.500 Inches, Nominal Conduit Size 3 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

THB AHF612LHB9024 H BEAM 12 INCH VERTICAL OUTSIDE 90 24 INCH RADIUS ALUMINUM

Category: 90° Horizontal Cable Tray Bend

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 5.5 - 8.5. Type LPJ-SP or AJT Maximum Fuse: 12. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

Long Impact Auger Wood Bit 11/16" x 30". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

Category: Knockout Punches

The ta25du-4.0 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10a. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop- and test function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type

The 4-Post rack combines the stability of a cabinet with the accessibility of an open rack to deliver maximum flexibility. The 45 RU rack is 23 inches wide overall (with 19 inch standard EIA mount) and 36 inches deep, with adjustable mounting rails that have cage nut EIA universal mounting hole spacing, and printed numbering. A range of cable managers and accessories work with the rack. The rack is UL listed for 2,500 pounds and is made of welded steel. The rack is black.

Category: Floor Mount Racks

The Deluxe Combination Ceramic Heater, Light, and Exhaust Fan will make your home a more comfortable place providing the perfect solution for rooms that are in need of extra warmth. This combination unit features 1350 watts of ceramic heating power and provides 70 CFM of ventilation at 5.0 Sones. It also provides up to 100 watts of incandescent lighting. A moonstone glass light lens diffuses light throughout the room and will not yellow and become brittle over time like most plastic lens. The self-regulating ceramic heating element maintains a lower surface temperature than traditional coil heaters. The 4" metal duct connection collar and damper protects against back drafts. The unit easily installs using the included adjustable hanging brackets.

Category: Fan / Light / Heater Units

The Ta75Du-25 Thermal Overload Relay Is An Economic Electromechanical Protection Device For The Main Circuit. It Offers Reliable And Fast Protection For Motors In The Event Of Overload Or Phase Failure. The Device Has Trip Class 10A. Further Features Are The Temperature Compensation, Trip Contact (Nc), Signal Contact (No), Automatic- Or Manual Reset Selectable, Trip-Free Mechanism, Stop- And Test Function And A Trip Indication. The Overload Relays Are Connected Directly To The Block Contactors. Single Mounting Kits Are Available As Accessory.

Category: Overload Relays - Thermal Type