"wiremold"

Non-Metallic, 2A, Single Unloaded Systimax Module. Black.

Category: Keystone Modules For Metallic Raceway

Eleven outlets with t-slots. 6' (1.8m) cord. Length 70" (1.8m). Computer grade surge protection, 20 Amps.

Category: Commercial Grade Power Strips

Poke-Thru Device Assembly, 1-1/4" and 2" Conduit Openings and Closure Plugs, Color/Finish: Brass

Category: Assembled Poke-Through Units

Non-Metallic, 2A, Single Unloaded Systimax Module. White.

Category: Keystone Modules For Metallic Raceway

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.59" Diameter. Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Tee Fitting, PN10 Series. Size: 2-11/16" Length, 5-5/16" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Makes 90 degree external corners. Two AL2401 Couplings included.

Category: Small 2-Piece Metallic Raceway Elbows

Connects 3000 Series Raceway from flushed-in wall box. Gray

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Plastic clips on back of bracket provide cable storage loop. For use with WPACR. Activate 2A jacks snap directly into bracket.

Category: Recessed Floor Box Service Fittings

Non-Metallic, Internal Cover Elbow, 5000 Series. Size: 5-5/16" Length, 1-5/8" Width. PVC, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Half-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. For use on side compartments only.

Category: Poke-Through Mounting Plates

ModPower End Unit, In Surface, Connect Up To Six Of Our Power Units Together To Create A System Of Power For Training Spaces, Workstations Or Flexible Spaces, (3) Straight Blade Tamper-Resistant Receptacles & (2) USB Ports (1 USB-A, 1 USB-C), 3 Ft. Cord Length, Magnesium

Category: Commercial Grade Power Strips

Accepts two Ortronics TracJack inserts. Finish - Gray

Holds four (4) Legrand AVIP or Extron Electronics MAAP devices. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Single opening with Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters.

Category: Recessed Floor Box Service Fittings

Accepts single device 1.39" (35mm). NOTE: Standard size for device plates for Plate Location 3 is 5 7/32" (132mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

Sectional device plate, provided with double opening to accept two microphone devices.

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, Flexible Corduct. 1600 Series. Size: 10' Length, 3-11/32" Width, 30/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

880w2 Floor Box With 828tcal Brushed Aluminum Flange Included. Flange Can Be Used For Tile Or Carpet Applications. Order Cover Separately.

Category: Square Recessed Floor Boxes

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Floor Box Service Fittings

3-Compartment Combination Box, Metallic, Depth: 5", Length: 8-3/4", Width: 6-3/4". Raised Floorbox, Series AF, Color: Gray Tile Cover & Trim.

Category: Recessed Compartment Boxes

Brass Screw Plug To Abandon Service Fitting, Screws Into Housing

Category: Recessed Floor Box Plate Plugs

Accepts one CM2 Series communication connectivity and three Legrand AVIP or Extron Electronics MAAP Series Devices.

Category: Recessed Floor Box Service Fittings