Search results

THB CPO187-C-C CLR 3/16 IN TH

Category: Thin Wall Heat Shrink

Steel City® LN-210 Conduit Locknut, 4 in, For Use With Rigid/IMC Conduit, Die Cast Zinc

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

THB J2BB-B1-5 1 1/4 - 2 BRONZ

Category: Bare Wire Ground Clamps

BLK PA50-BB 500 PIN ADPT TERM

Category: Aluminum Pigtail Adapters

THB ST250-478 SS JKTD FTG HUB

Category: Single Barrel MC / AC Connectors

Weatherproof Cover, 2-Gang, Type: Blank, Gasket and Screws Included, Vertical/Horizontal Mount, Aluminum

Category: 2-Gang Metallic Weatherproof Box Covers

1IN 2H PIPE STRP

Category: Steel 2-Hole Conduit Straps

Standard Terminal Insert, 32 Positions, 20-14 AWG Wire, Screw/Male, Die Cast Aluminum Alloy

Category: Industrial Rectangular Connector Male Inserts

2 Inch. Flash Plate. Roof Flashing For 2 Inch Conduit.

Category: Flashing - Steel Type

THB 5240GR 4IN STR LT NONINSU

Category: Straight Steel Liquidtight Flex Connectors

2 Inch, Two Hole Pipe Strap, Stainless Steel, For Use with Rigid/IMC Conduit

Category: Steel 2-Hole Conduit Straps

Compression Lug, 1-Hole, Short Barrel, Copper, 1-Conductor, 4/0 AWG, 1/2" Stud Size, Color Coded Purple

Category: 1-Hole Copper Compression Lugs

Conduit Body, C, 1-1/4 Inch, Form 7, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

THB NC 205 1.5 INCH CONN CLMP

Category: Zinc Die Cast NM Cable Connectors

Rigid Coupling, Three Piece, 4 Inch, Threaded, Steel, For Use with Rigid/IMC Conduit

Category: Iron Rigid Conduit Three Piece Couplings

Liquidtight Strain Relief Cord Connector, 2-1/2 Inch, Straight, Cord Range 2.350 to 2.565 Inch, Malleable Iron

Category: Straight Die Cast Zinc Cord Grips

Cap, Clamp-Type Service, Conduit Size 4 Inches, Number Of Holes 4, Size 4(1-3/4 Inch) 2(1-1/8 Inch), Aluminum, For Rigid/Intermediate Or Thinwall

Category: Service Entrance Caps - Metallic

Heavy-Wall Heat-Shrinkable Tubing for Cable Range 2/0 - 350 MCM, Expanded Diameter 1.5, Length 8 inch. rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

Category: Heavy Wall Heat Shrink

Cable Tie, Natural Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, UL/EN/CSA62275 Type 2/21 Rated for AH-2 Plenum, Length of 357mm (14 Inches), Width of 2.3mm (0.09 Inches), Thickness of 1.1mm (0.04 Inches), Tensile Strength Rating of 80 Newtons (18 Pounds)

Category: Non-Releasable Cable Ties

AC/MC/Flex Connector, 3 Inch, 90 Degree, Squeeze Type, Malleable Iron/Zinc

Category: 90 Degree Two Screw Squeeze Flex Connectors

Threaded Erickson Coupling, 3/4 IN, Use With Rigid/IMC Conduit, Malleable Iron

Category: Iron Rigid Conduit Three Piece Couplings

Compression Coupling, Concrete Tight, Conduit Size 1 Inch, Material Zinc Plated Steel, For use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Couplings

THB LT38M 3/8IN STR LT BULLET

Category: Straight Non-Metallic Liquidtight Flex Connectors

TB FS132B FEMALE INSERT SCREW CONN

Category: Industrial Rectangular Connector Female Inserts