Search results

Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications. R (600) Volts 30 Amps 60 series.

Category: Fuse Reducers

200-400A R FUSE REDUCER PR

Category: Fuse Reducers

Power Distribution Block, Finger Safe, 310 Amp, 1 Line, 8 Load, Copper

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Power Distribution Block, Finger Safe, 175 Amp, 1 Line, 4 Load, Copper

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications. 600 Volts 100 to 200 Amps Class R series.

Category: Fuse Reducers

Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications. 600 Volts 100 to 200 Amps Class J series.

Category: Fuse Reducers

PDB 3P CU MINIATURE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

PDB 2P CU MINIATURE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

PDB 3P CU MINIATURE UL1953

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

PDB 3P CU INTERMEDIATE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

PDB 3P CU INTERMEDIATE UL1953

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Fuse, Cable Protector, 350MCM, Bolt On, Straight Bus to Offset Bus, Copper, 600 Volt AC

Category: Limiter Fuses

PDB 3P CU INTERMEDIATE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Line Conductor Range (1) 350 MCM - 6 AWG, Load Conductor Range (8) 14 - 2 AWG, Copper With Polycarbonate Insulation

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Limiter Fuse, Cable Protector, 600 Volt AC, 250 MCM to Offset Bus, Copper

Category: Limiter Fuses

Power Distribution Block, Copper, 3 Pole, 2 AWG To 14 AWG, 175 Amp, 600 Volt, CU Rated

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks