"cutler and hammer breakers"

Eaton's Bussmann series Multi-pole connector kit, one kit will gang up to 4-poles together, suitable for CH14 and CH22 Modular fuse holders

Category: Miscellaneous Fuse Accessories

15 kV, 110 kV BIL, Standard Type C Porcelain Cutout with a 200A, 12kAIC fuseholder, parallel-groove connector and a NEMA "B" crossarm bracket.

Category: Fuse Links

DIN Rail Adapter For use with 30A Midget, Class CC and Class G Fuse Blocks

Category: DIN Rail Adapters

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 30 amps Class CC series.

Category: Fuse Covers

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 2 cap .

Category: Miscellaneous Fuse Accessories

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. end anchor .

Category: Miscellaneous Fuse Accessories

The NH system is classified among plug-in fuse systems and is composed of: ò fuse-base (possibly including terminal covers and phase barriers) ò fuse-link with blade contact ò fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 690 Volts 32 Amps gG NH000 series.

Category: Fuse Links

INSULATION CAP. Safe distribution of power to multiple fuse holders in a compact design is a key objective for panel designers. The Littelfuse UL508 bus bar system eliminates most wire terminations in a time saving package. A power distribution block and associated conductors are no longer needed to feed multiple POWR-SAFEÖ fuse holders. Features/Benefits: Decreases wiring terminations. Small footprint reduces space requirements. Reduces assembly time. Prevents accidental finger exposure. Quick and safe method of changing fuse holder configurations. Allows for future expansion. Improves troubleshooting. Eliminates power distribution block RoHS compliant and lead (Pb) free. Customization: This product is simple to integrate into one- and three-phase applications. It offers multiple pole configurations and amperage ratings to match the designerÆs requirements. Instructions are included for bus bar cutting by the customer for further customization. Individual power feed lugs are available which allow termination at any point along the bus bar.

Category: Fuse Covers

Fuse Puller and Test Light, Large, Test Lite, Color: Yellow, Fuse Type: Cartridge, Fuse Diameter: 9/16 - 1 Inch, Fuse Amperage: 60, 100 Amp, Fuse Voltage: 250, 600 Volt, Accessories: (34-013) Test Lead Set with Test Prod, (34-014) Test Lead Set With Insulated Clip, Test Capacity: 100 - 600

Category: Fuse Pullers

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 250 Volts 30 amps Class H-K-R series.

Category: Fuse Covers

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 100 amps Class H-K-R w/indicator series.

Category: Fuse Covers

Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications. 600 Volts 60 to 100 Amps Class H and K series.

Category: Fuse Reducers

Eaton Enhanced 50 Series Photoelectric Sensor, dist. 500 Ft., 250 mA max DC, NPN and PNP Open Collector, 250 mA at 40 Vdc, 4 Pin M12 Pigtail Connector, 10-40 Vdc input, Reverse polarity, short circuit and overload, Thu-Beam, 0.5 Ft. (.15m)

Category: Fuse Wire

Length: 8in, Application: For 0 To 200a/250v And 0 To 100a/600v Fuse

Category: Fuse Pullers

FUSE PULLER 0-100A/250V AND 600V 1/2 TO 1 IN. FUSES

Category: Fuse Pullers

Universal Fuse Cup, Holds 100 Amp and 200 Amp Fuse Barrels, Weight: 0.3 lbs

Category: Miscellaneous Fuse Accessories

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 60 amps Class J w/indicator series.

Category: Fuse Covers

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 30 amps Class J series.

Category: Fuse Covers

Eaton Bussmann series TRON fuse clip clamp, Used for Ferrule and Blade Type cartridge fuse clip, 600V, 35-60A, Non Indicating, Plated steel Jaws, Phenolic Knob

Category: Clip Clamps

Cover Puller for CC and Midget Fuses

Category: Fuse Covers

32A Industrial Shock Block® With A Supply Voltage Of 208 And Trip Level (Ma) At 6, 10–100 In Increments Of 10 (Selectable)

Category: Compact Circuit Protectors

32A Industrial Shock Block® With A Supply Voltage Of 208 And Trip Level (Ma) 20 (Fixed)

Category: Compact Circuit Protectors

600V Power Distribution System

Category: Compact Circuit Protectors

Eaton Bussmann series TRON fuse clip clamp, Used for Ferrule and Blade Type cartridge fuse clip, 250V, 600V, 450-600A, Non Indicating, Plated steel Jaws, Phenolic Knob

Category: Clip Clamps