Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 350-450 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-40W, 2-4 ft T8, T10, T12 or 4-Pin Long Compact

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following Lamp Types: (1) Philips LED T8 InstantFit, BiPin, 8.5 - 16.5W. (designated by new Silver Can)

Category: Emergency Fluorescent Ballasts

Fluorescent Battery Pack, 2 - 4 foot Linear Fluorescent, 2.3 Watt, 120/277 Volt

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, MVolt Series, 120/277V, 90 Minute Illumination Time, 72 Hour Recharge

Category: Emergency Fluorescent Ballasts

LITHONIA PS600DWM12

Category: Emergency Fluorescent Ballasts

Emergency Fluorescent Battery Pack, 9.4 Volt DC, 120V-277V Input, 90 Minute Emergency Operation

Category: Emergency Fluorescent Ballasts

Lampak Series Fluorescent Power Pack, Operates One Or Two Linear 2 -8 foot Fluorescent Lamps, 340-450 Initial Lumens, Damp Location Listed,120/277 Volts AC

Category: Emergency Fluorescent Ballasts

LED Emergency Backup Kit, 12 Watt, Constant Wattage Driver With Dedicated LED Module, 1200 Lumens for 90 Minutes, 120-277 Volt Input, Remote Battery Pack

Category: Emergency Fluorescent Ballasts

Emergency Battery Pack, Fluorescent, 120/277 Volt

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery, Charger and Redi-Test (Auto-Code Compliance Testing), Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 1100-1400 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-215W, 2-8 ft or (2) 17-40W 2-4 ft T8, T9, T10 or T12 lamps or (1) 18-55W or (2) 18-39W, 4-Pin Long Compact.

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. The B94CGU can be used with one 13 - 42 W (4-pin) twin, quad or triple twin-tube compact. It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger; 17-250W, Input Voltage: 120/277V;90 Minute Illumination Time;24 Hr Recharge. Lumens: 300-750;Hazardous Location

Category: Emergency Fluorescent Ballasts

LED Emergency Backup Kit, 5 Watt, 120-277 Volt Input, Optimized for Recessed and Integrated Fixtures

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 390-700 Lumen Linear Fluorescent Lamp Types: (1) 14-55W, 2-8 ft Standard or HO, T5 or T8 lamps.

Category: Emergency Fluorescent Ballasts

The REDiTEST B30ST emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one red case. The B30ST can be used with most 17 - 215 W (2’ - 8’) T5, T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving, and (4-pin) twin, quad and triple twin-tube compacts. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts.

Category: Emergency Fluorescent Ballasts

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277 Volt, 1000-3500 Lumens Initial Light Output, 32-215 Watt

Category: Emergency Fluorescent Ballasts