Transformers

JVM5 VOLTAGE XFR

Category: Medium Voltage Transformers

POWER SUPPLY 340-550V AC INPUT 24V DC OUTPUT 480 WATTS 20A

Category: 3-Phase DC Power Supplies

Transformer, Control, Terminal Board Connection, 750 VA, 240 x 480 - 120/240, Open

Category: 500 - 800 VA Industrial Control Transformers

Transformer, Control, Terminal Board Connection, 1.5 kVA, 240 x 480 - 120/240, Open

Category: 1 - 1.6 KVA Industrial Control Transformers

Transformer, Dry Type, 5 kVA, 240/480 Volt AC, Primary, 120/240 Volt AC Secondary, 115D Rise

Category: 5 KVA Dry Type Transformers

Abb; Power Supply; Voltage Rating: Input: 90 - 264 Vac/210 - 370 Vdc, Output: 24vdc; Amperage Rating: Input: 600 Milamp At 115 Vac, 344 Milamp At 230 Vac, Output: 1.3 Amp At Less Than Or Equal To 60 Deg C; Wattage: 30 Wtt; Frequency Rating:47 - 63 Hz; Phase: 1 Ph; Fuse Rating: 2 Amp At 250 Vac Slow Acting; Material: Plastic Housing; Efficiency: 83 Pct; Insulation: Rated Insulation Voltage Ui: Input/output - 3 Kvac; Cable Size: Fine Strand With/without Wire End Ferrule And Rigid: 24 - 14 Awg (input/output); Enclosure: Ip20; Environmental Conditions: Operating Temperature: -40 To 70 Deg C, Rated Load: -40 To 60 Deg C, Storage Temperature: -40 To 85 Deg C, Damp Heat, Cyclic: (4) 24 Hr Cycles, 40 Deg C, 95 Pct Rh;width: 53 Mm; Height: 91 Mm; Control Time: Less Than 1 Ms; Current Limiting At Short Circuit: 4.2 Amp; Power Failure Buffering Time: 30 Ms; Rise Time: 1 Ms; Tightening Torque: 0.36 - 0.56 N-m; Inrush Current Limiting: 50 Amp At 230 Vac; Wire Strip Length: 6 Mm; Power Consumption: 37.92 Wtt At 110 Vac, 38.16 Wtt At 230vac; Depth: 57.5 Mm

Category: 1-Phase DC Power Supplies

POWER SUPPLY 90-265V AC INPUT 12V DC OUTPUT 40 WATTS 3.33A

Category: 1-Phase DC Power Supplies

Transformer, Dry Type, Type QMS, 15KVA, 480 - 120/240

Category: 15 KVA Dry Type Transformers

HMD SP3000MQMJ 3000 VA 240X48

Category: 2 - 7.5 KVA Industrial Control Transformers

Transformer, Dry Type, Type QL, 75 KV, 480 Delta Primary - 208Y/120 Volt AC Secondary, 150C Rise

Category: 50 - 75 KVA Dry Type Transformers

Transformer, Dry Type, Type QL, 30 KV, 480 Delta Primary - 208Y/120 Volt AC Secondary, 150C Rise

Category: 30 KVA Dry Type Transformers

Transformer, Buck-Boost, 120/240 x 12/24 , 0.1 kVA, Type QB, 1-Phase

Category: Up To 500 VA Buck-Boost Transformers

75 KVA, 3-Phase, 480 Delta Primary Volts - 208Y /120 Secondary Volts, May Be Used Oa a 4-Wire 480Y/277 Volts Supply— 3Ø, 60 Hz, NEMA 3R, Ventilated, 150 Degree C, Aluminum Windings, 60 Hz operation, Meet DOE 2016 efficiency requirements, ***Reverse Feed Capable***

Category: 50 - 75 KVA Dry Type Transformers

Transformer, Dry Type, 50 kVA, 1-Phase, 240x480 x 120/240, NEMA 3R, 150 Degree C, Aluminum Windings, 60 Hz operation

Category: 50 - 75 KVA Dry Type Transformers

ABB's General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.

Category: 60 - 100 VA Industrial Control Transformers

Transformer, Control, Terminal Board Connection, 100 VA, 240 x 480 - 120/240, Open

Category: 60 - 100 VA Industrial Control Transformers

Transformer, Machine Tool, 0.15 kVA, 230/460 - 115, Open

Category: 130 - 300 VA Industrial Control Transformers

KIR-60 INDOOR 60KV BIL NOM VOLTAGE 5KV 25AMP 60HRTZ

Category: Medium Voltage Transformers

2.5 Amp, Power Supply. CP-E Series. 1-Phase. Rated Input Voltage: 100 - 240V AC/90-375V DC. Rated Output Voltage: 12V DC. Rated Output Current: 2.5 Amps (30 Watts).

Category: 1-Phase DC Power Supplies

Cork and Ribbed Neoprene Vibration Pad. LxW: 3" x 3", Used to Dampen Noise and Vibration in Floor Caused by Medium and High Speed Equipment

Category: Transformer Isolation Pads

Core and coil transformers for machine tool applications are used to provide voltage to control devices in applications where regulation and minimum space are important. Fully encapsulated coil is impervious to moisture-Pressure plate terminals ensure secure connections-Terminal board is anchored in the epoxy for greater reliability-Wide variety of fusing options-Rugged, high-impact plastic terminal board-Full head 8 brass screws assure quick, easy terminations with maximum connection integrity-Copper windings -Flexible design allows inp ut or ou tput volta ge to ma tch a ny app lication-CUL, CE, UL approvals-Available fuse-clips offer simple, low-cost fusing with terminal block models and minimum space are important. 58K2931

Category: 500 - 800 VA Industrial Control Transformers

Transformer, Pool Spa Lights, 2 x 300 Watt, 120 Volt AC Input, 3 Amp, 12 - 14 Volt DC Output, Beige Steel, NEMA 3R Enclosure

Category: Electronic Lighting Transformers

Transformer, Buck-Boost, 120/240 x 12/24 , 1 kVA, Type QB, 1-Phase

Category: 600 VA - 1.5 KVA Buck-Boost Transformers

Conduit to Tray Adaptor, 1 Inch to 1-1/4 Inch, Malleable Iron

Category: Electronic Lighting Transformers