Fittings

Cord Connector, Liquidtight, 1/2 Inch, Cord Range: .31 to .38 Inch, Nylon, For Use with Flexible Cord

Category: Straight Non-Metallic Cord Grips

Right Angle Clamp, 3/4 inch, Material: Steel, Finish: Hot-Dipped Galvanized.

Category: Malleable Iron EMT Right Angle Type K-Clamps

OZ-Gedney Clip-On Series Cover, 1/2 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA

Category: Steel Conduit Body Covers

PVC Coated Conduit Body, Type T, 1-1/2 Inch, Form 7, Iron/PVC Coated

Category: PVC Coated Type T Conduit Bodies

1/2 Inch Form 7, LB Conduit Body, Body Material Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

Telescoping Screw Gun Box Bracket Between Stud Assembly 4" Box

Category: Prefab Assemblies

Cable Entry Gland Plate, Rectangular, 12 Cable Openings, 1.730 x 5.590 x 0.470 Inch,Non-Metallic, Gray

Category: Cable Sealing Rectangular Frames

5" P&c 5 Deg Angle Coupling (bxs)

Category: PVC Couplings

App Stb150sr 1 1/2 Lt Kellums

Category: Liquidtight Strain-Relief Grips with Mesh

Conduit Strut Strap, 2 Inch, Aluminum With SS Hardware, For Use With Rigid/IMC Conduit

Category: Strut Channel Aluminum Conduit Clamps

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 11/32 IN Height, 3-7/16 IN Width, Size: 2-1/2 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Gasketed Conduit Locknuts

PVC CTD PIPESTRAP 1HOLE 1-1/4IN GRY

Category: PVC Coated 1-Hole Conduit Straps

Steel City CHASE HA-202 Conduit Nipple W/ Throat, 3/4 IN, Zinc Alloy

Category: Zinc Die Cast Chase Nipples

MC/AC/Flex Connector, Duplex, Flex Conduit Size 3/8 Inch With 1/2 Inch Knockout, Malleable Iron/Zinc, For Use To Ground and Secure (2) Armored Cables to Box/Enclosure.

Category: Double Barrel MC / AC Connectors

1-Inch Two-Piece Electrical Nonmetallic Tubing (ENT) Threaded Male Terminal Adapter, Material - Polycarbonate, Thread Size- 1-11 NPT, Blue

Category: ENT Couplings

Universal Strut Strap, Diameter: 2 in, Material: Steel, Finish: Electro-Galvanized, Thickness 14 ga., Universal Clamp for EMT, IMC & GRC.

Category: PVC Coated Conduit Hubs

1/2 IN Liquidtight Strain Relief Connector, 1/8 IN To 3/8 IN Cable Openings, 45 Deg Bend, Malleable Iron

Category: Straight Aluminum Cord Grips

EYS Series Sealing Fitting, 3/4", Double Coated

Category: PVC Coated Type EYS Sealing Fittings

Kwik Washer, For Use With ANY channel, Size: 1/4 in, Material: Steel, Finish: Electro-Galvanized.

Category: Strut Channel Washers

J-Hook With Angle Bracket, Diameter: 3/4 Inch, Material: Steel, For Use With Low Voltage Cables.

Category: J-Hook From Wire/Rod & Beam

CONDUIT TO BEAM FASTENER, GUIDE-RITE, 1/2-IN., 3/4-IN. CONDUIT SIZE

Category: Conduit Hangers From Wire/Rod & Beam

Conduit Clip to Flange, Size: 3/8 Inch, Flange: 5/16 - 1/2 Inch, Steel

Category: Flange-Mount Cable/Conduit Clips

Short Spring Channel Nut, Size: 1/2 in, Material: Galv-Krom Steel.

Category: Strut Channel Spring Nuts

Carlon E996d 1/2 Pvc Box Adpt

Category: PVC Male Terminal Adapters