Search results

Multi-Tap connector, double-sided, clear insulation, 8 ports, 2/0 - #14 STR, #10 - #14 SOL.

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap connector, double-sided, clear insulation, 12 ports, 600 kcmil - #6 AWG STR.

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap connector, single-sided, clear insulation, 6 ports, 350 kcmil - #10 STR.

Category: Single Sided Entry Wire Connector Blocks

3M 5810-D-250

Category: Loadbreak Elbows

Bronze, service post connector, female, one cable, type SPF1. 1/0 STR - 4/0 STR.

Category: 1-Wire Service Post Connectors

Bronze grounding clamp, .204-.419" wire dia. range 1 1/2" IPS.

Category: U-Bolt Ground Clamps

#6 AWG (16mm²) jumper, 90° bent lug on grounding strip side, provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5 x 12mm thread-forming screws.

Category: Bonding Jumpers

3m(tm) 200 Amp Industrial Loadbreak Elbow?5811-c-1

Category: Loadbreak Elbows

#6 AWG (16mm²) jumper,90° bent lug on grounding strip side to straight lug on equipment.

Category: Bonding Jumpers

Vinyl Terminal Kit in Steel BoxIncludes the following: (100) PV18-6LF; PV18-8LF; PV14-8LF; PV14-10LF; BSV18X; BSV14X; (50) PV10-10LF; BSV10X; (1) CT-100A tool; K-1000 box.

Category: Small Wire Terminal Kits

VeriSafe Connection Kit for Tapping 2 to 2/0 AWG conductors.

Category: Cable Lug & Split Bolt Mounting Hardware

Crystal clear thin wall PVC heat shrink, 1.5" (38.1mm) diameter, 9.25" (235mm) length, clear polyvinyl chloride, 10 pc. package quantity.

Category: Thin Wall Heat Shrink

Belleville compression washer, 1.49" diameter.

Category: Cable Lug & Split Bolt Mounting Hardware

3m(tm) 200 Amp Industrial Loadbreak Elbow?5810-b-1

Category: Loadbreak Elbows

VeriSafe Connection Kit for Tapping 8 to 4 AWG conductors. For use with VeriSafe Absence of Voltage Tester.

Category: Cable Lug & Split Bolt Mounting Hardware

Crystal clear thin wall PVC heat shrink, 1" (25.4mm) diameter, 7.75" (196.9mm) length, clear polyvinyl chloride, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

Stud Type Junction Block, Non-feed through, 30A, Black thermoplastic with zinc-plated steel studs material, 20 lb-in torque rating

Category: Terminal Junction Blocks

Ideal; Heat Shrinkable Tube; Thermo-shrink?; Thin-wall; Shrink Ratio: 2:1; Outside Diameter: 0.375 In; Thickness: 022 In; Length: 200 Ft; Volume Resistivity: 1014 Ohm Cm For Astm D 876 Test Method; Dielectric Strength: 20 Kv/mm For Astm D 150 Test Method; Continuous Operating Temperature: -55 To 125 Deg C; Minimum Shrink Temperature: 70 Deg C; Heat Shock: No Cracking For Ul 224(250 Deg C /4 Hours); Cable Range: 8 - 4 Awg; Nominal Recoveredi.d. (max.): 0.185 In; Expanded I.d.(min.): 0.421; Elongation At Break: 600 Pct For Astm D 638 Test Method; Elongation Of Break After Aging: 350 Pct For Ul 224 Test Method; Cold Bend Test (-55?c/4hours): No Cracking For Ul 224 Test Method; Copper Corrosion: Pass For Ul 224 Test Method; Chemical Resistance: Pass For Ul 224 Test Method; Longitudinal Shrinkage: 0 Plus Or Minus 5 Pct For Ul 224 Test Method; Eccentricity: 30 Pct For Ul 224 Test Method; Normal Size: 3/8 In; Package: Spool

Category: Thin Wall Heat Shrink

Bonding nut for threaded M6 rail fasteners.

Category: Bonding Connectors

VeriSafe Connection Kit for Tapping 6 to 2 AWG conductors.

Category: Cable Lug & Split Bolt Mounting Hardware

Bonding nut for threaded M5 rail fasteners.

Category: Bonding Connectors

3m(tm) Molded Rubber Splice Qs-ii 5505, 750 Kcmil Stranded, Cable Insulation O.d. 1.320-1.520 In, 1 Per Case

Category: Medium Voltage Cold Shrink Splice Kits

Bronze, service post connector, female, two cables, type SPF2. #1 SOL - 4/0 STR.

Category: 2-Wire Service Post Connectors

Bronze, service post connector, female, one cable, type SPF1. #6 STR - #3 STR.

Category: 1-Wire Service Post Connectors