Search results

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Attaches to 12x4 channel and/or fittings to create a 90° horizontal branch with a 6x4 exit from straight horizontal run. Accepts optional split cover FRTSC12W6BL.

Category: 1-Piece Non-Metallic Raceway Elbows

Horizontal Tee Fitting, 2 x 2, Fiber-Duct, Yellow

Category: Metallic Overfloor Raceway Elbows

Optional split cover for the horizontal right angle fitting FRRA12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 24x4 channel and/or fittings to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV4524X4YL to change level of a straight horizontal run. Includes cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Optional split cover for the horizontal tee fitting FRT4X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Attaches to 12x4 channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV4512X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Splice Washer, 4.00x4.00x8.00, Lt Gray, Steel

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Cable Tray, 4" Depth x 12" Width x 10' Section, Material: Carbon Steel. Finish: Electroplated Zinc.

Category: Straight Wire Basket

1-1/2 Inch Liquidtight Flexible Steel Conduit, Type ATX - Extreme (High/Low) Temperature, Thermoplastic Rubber Jacket, Black, 50' Coil

Category: Liquidtight Flexible Metallic Conduit

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel while transitioning to the left. It is black and made of ABS plastic. It accepts split cover FRRF126LSCBL.

Category: 1-Piece Non-Metallic Raceway Elbows

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a horizontal four way cross intersection. Cover included. Yellow.

Category: Wireway Cross Fittings

Used to carry the cables vertically to the front or the back of equipment racks throughout the system. Accepts cover C2BL6. Extra supports required when used in horizontal applications. Cover sold separately, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, International Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

The Panduct PanelMax 3 replacement cover in white is used with the DRD33 DIN Rail Wiring Duct. It is made of PVC material, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Optional split cover for the horizontal right angle fitting FRRA6X4OR. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Single gang two-piece screw together intermediate outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12in L x 3.38in W x 2.27in H (130.2mm x 86.0mm x 57.7mm). Breako

Category: 1-Gang Raceway Device Boxes

Panduct® type F narrow slot wiring duct, 1 W x 1 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type HN hinged cover narrow slot wiring duct, 3 W x 3 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 1 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Attaches to 12x4 channel and/or fittings to create a horizontal four way cross intersection with two 4x4 exits.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Attaches to 4x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC4OR.

Category: 1-Piece Non-Metallic Raceway Elbows