Boxes & Enclosures

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRX Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.88" Opening, 18 Cubic Inches and (4) 1" Threaded Hubs. For use with Threaded Metal Conduit

Category: Explosion-Proof X Conduit Outlet Boxes

Switch/Outlet Box, 1-Gang, Old Work, Non-Metallic, Depth: 3-5/8", Cubic Inches: 20". Includes: Ears, Clamps, (x50/Case)

Category: Non-Metallic Old Work Switch / Outlet Boxes

GR Conduit Outlet Box, (2) 1 Inch Threaded Hubs, Malleable Iron Body with Aluminum Cover, Explosion-Proof, Dust-Ignitionproof, UNILET For Use With Threaded Metal Conduit, Furnished with Internal Ground Screw and O-Ring

Category: Explosion-Proof L Conduit Outlet Boxes

4" Octagon Box, Drawn, Metallic. Depth: 2-1/8". Side Knockouts: (4) 1/2". Bottom Knockouts: (5) 1/2". Cubic Inches: 21.5".

Category: Octagon Metallic Boxes

4-11/16" Square Cover, 1-Device, Mud Ring, 3/4" Raised, Drawn, Metallic.

Category: 4-11/16" Square Metallic Box Mud Rings

3 3/4 Round Old Work Ceiling Box with Swing brackets for mounting that adjust from 1 1/4 down to 1/8. Four Auto/Clamps, Includes Device mounting holes. 50 pack.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

Mounting Bracket. 1-Gang, Low Voltage, Device Mount, Non-Metallic. For use with Low Voltage Class 2 Applications. Fits 1/4" to 1-1/4" Drywall.

Category: Non-Metallic Old Work Mounting Brackets

Panel, 46.20x34.20, Size/Dims: fits 48.00x36.00, Material/Finish: Steel/White.

Category: Enclosure Back Panels

4 In. Round Ceiling Rated Box, 1/2 In. Deep, Old Work

Category: Metallic Ceiling Pans

Hole Seal, for 3.5" Conduit, Gasketed, Oil Tight, Size/Dims: 4.62" Diameter, Material/Finish: Steel/Gray.

Category: Painted Steel Enclosure Hole Seals

Weatherproof Cover, 2-Gang, (1) Duplex Receptacle, (1) Toggle Switch & (6) Single Receptacle, Vertical Mount, Die Cast, Diameter: 1.25", 1.375", 1.625", 1.6875 or 2.125". Padlockable Option. Gray.

Category: 2-Gang Metallic Weatherproof Box Covers

GR Universal Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, GRJS Hub Type, Malleable Iron Body with Externally Threaded Aluminum Surface Cover with 2.56 Inch Opening, (3) Close-up Plugs and (5) 3/4 Inch Threaded Universal Openings. For Use With Rigid Conduit in Classified, Indoor/Outdoor applications.

Category: Explosion-Proof X Conduit Outlet Boxes

Wall Mount, Type 3R, Enclosure, Screw Cover / KO's, Size/Dims: 24" x 24" x 6", Material/Finish: Galvanized Steel/Gray

Category: NEMA 3R Screw Cover Enclosures

4 Inch Square, Exposed Work Cover, Type: (2) Single Receptacles, Opening Diameter: 1.406 Inch, 1/2 Inch Raised, Drawn, Metallic, Cubic Inches: 6.5

Category: 4" Square Metallic Box Covers

2-Gang, FDC Type, Malleable Iron Ridge Top, Cast Box. Hub Size: 3/4 Inch. Box Depth: 2.69 Inch Includes: Internal Ground Screw. For use with Threaded Rigid Metal Conduit.

Category: 2-Gang Malleable Iron FS & FD Device Boxes

Weatherproof Cover, 1-Gang, Rectangular Cluster Cover with (1) 1/2" Outlet, Vertical/Horizontal Mount, Die Cast, Gray.

Category: 1-Gang Metallic Weatherproof Box Covers

Junction Box, NEMA 4X, Hinged Cover, 8 x 6 x 4 Inch, Stainless Steel Type 304

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Vapor Proof GFI Cover, 1-Gang, Aluminum, Fits FS and FD Type Boxes, Wet Locations (NEMA 3R), Furnished with Stainless Steel Screws with a Gasket.

Category: Device Box Covers - Aluminum

BOX SUPPORT, 4-IN. METAL STUD SIZE

Category: Metallic Box Supports

1-Gang, Vertical/Horizontal Mount, Weatherproof Cover, Die Cast, Type: 12-Device Configurations. Padlockable Option. Mounting System: Quick-Fit. Color: Bronze

Category: 1-Gang Metallic Weatherproof Box Covers

Eaton B-Line series datacomm and low voltage support fasteners, Single gang bracket, Grey, Pre-galvanized, Design load capacity 0.05KN, Steel, Bracket mount, Maximum 1-1/4” drywall thickness, Cover plate mounting bracket style

Category: Metallic Low Voltage Box Mounting Brackets

Polycarbonate duplex cover plate with flip lids for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Brown

Category: Round Recessed Box Covers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

FSS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes