Search results

RTT 8800370 BRACKET

Category: Enclosure Mounting Bracket Kits

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latches, NEMA 4X, 47 x 35 x 10 Inch, Stainless Steel, Includes Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Mounting Plate For KL and KL-HD Enclosures, 5.9 x 5.9 Inch, 2.0mm Thick, Carbon Steel/Zinc Plated

Category: Enclosure Front Plates

Metal multi-tooth screws, Metal multi-tooth screws, description: For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Packaging Unit: 300 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Floor Stand Kit, WM Series, 12 Inch, Carbon Steel, Includes Fasteners

Category: Enclosure Floor Stands

Radial Fan, 133 mm

Category: Enclosure Compact Cooling Fans

L 35 L 35 at 50 Hz: 2.43 kW (8700 BTU) L 35 L 35 at 60 Hz: 2.57 kW (9383 BTU) L 35 L 50 at 50 Hz: 1.68 kW (6483 BTU) L 35 L 50 at 60 Hz: 1.71 kW (6653 BTU)

Category: Enclosure Air Conditioners

Wall-Mount Enclosure for Disconnect, Hinged Cover, NEMA 4, IP66, Dimensions: W: 25.59", H: 23.62", D: 8.27"

Category: NEMA 4 Wall Mount Enclosures

Replacement Hinge, For AE Series Wall Mount Enclosure, Carbon Steel

Category: Enclosure Mounting Bracket Kits

Basic Enclosure AX, Sheet Steel, 10 x 20 x 28 Inch

Category: NEMA 12 Hinge Cover Junction Boxes

Condensate Discharge for Reliable Discharge From the Inside and Protection Against Splashes from The Outside (Labyrinth Effect), 6 Pack

Category: Non-Metallic Enclosure Hole Seals

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Filter, Class F5/M5, 173 x 173 x 12mm, Chemical Fiber

Category: Enclosure Cooling Fan & Exhaust Packages

Terminal boxes JB, Sheet steel, material: Enclosure and door: Sheet steel, all-round foamed-in PU seal, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: 180¦ hinge, Enclosure with door, Mounting plate, description: The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 36 x 30 x 16 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Cam locks, material: Stainless steel 1.4404 (AISI 316L), description: The alternative to the standard cam lock with lock insert, lock cylinder insert or double-bit insert

Category: Latch Kits For Single Door NEMA 12 Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 24 x 16 x 8.3 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Radial Fan, 330 mm

Category: Enclosure Compact Cooling Fans

Wall-Mount Enclosure for Disconnect, Hinged Cover, NEMA 4, IP66, Dimensions: W: 38.39", H: 47.24", D: 15.75"

Category: NEMA 4 Wall Mount Enclosures

Compact Wall Mount Enclosure, Hinge Cover With Quarter Turn Latches, NEMA 4X, 35x 24 x 8 Inch, Stainless Steel, Includes Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Base/plinth components, front and rear, 100 mm, Sheet steel, for TS, TS IT, SE, CM, TP, PC, IW, Solid, material: Base/plinth components: Sheet steel, Cover caps: Plastic, surface: Spray-finished, color: RAL 7022, Cover caps: RAL 9005, supply includes: 2 base/plinth components, 4 cover caps, Assembly parts, description: Base/plinth component consisting of one trim panel and two pre-configured corner pieces. Packaging Unit: 2 pc(s).

Category: Enclosure Housing Bases

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures