MC, NM-B, Liquidtight, Flex Fittings

Flex Connector, 90°, Squeeze, 3 Inch, Malleable Iron, For Use With Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Connector, Set Screw, Zinc Die Cast, Trade Size 3/4 Inch

Category: Set Screw Flex Connectors

AC/MC Cable Connector, 1/2 Inch, Size: 0.225 - 0.612 Inch, Type: 2 Screw Clamp, Zinc Die Cast

Category: Single Barrel MC / AC Connectors

Twin Screw zinc die-cast all-purpose 1/2" knockout connector for Flex, AC, MCI, and NM cable. Secures into knockout with a locknut. Has a cable range of 0.600" to 0.825" and an end stop of 0.615".

Category: Straight Squeeze Flex Connectors

TMC2 Connectors for MC Cable, NPT Size: 3/4", Cable Armor Diameter: 0.42" - 0.63", Cable Jacket Diameter: 0.50" - 0.75", Material: Aluminum. Watertight, Class I, Division 2, 4X and IP66.

Category: Single Barrel MC / AC Connectors

Squeeze Connector, 1/2 In Trade Size, 90°, Flex Or Armored Cable Insulated, Material: Zinc Die Cast

Category: 90 Degree Two Screw Squeeze Flex Connectors

Liquidtight Connector, Straight, 3/8 Inch, Steel, For Use With Metallic Liquidtight Conduit

Category: Straight Steel Liquidtight Flex Connectors

2-1/2 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range 2.10 to 2.70.

Category: Single Barrel MC / AC Connectors

Liquidtight Connector, Straight, 3 Inch, Steel, For Use With Metallic Liquidtight Conduit

Category: Straight Steel Liquidtight Flex Connectors

1-1/2 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range 1.36 to 1.77.

Category: Single Barrel MC / AC Connectors

Liquidtight Sealing Gasket, 2 Inch, Steel Retainer, Santoprene Rubber Seal

Category: Liquidtight Connectors - Accessories

Non-Metallic Sheathed Cable Connector, Two Screw, Straight, Knockout 3 Inch, Cable Range 1.150 - 1.980 Inch, Malleable Iron with Zinc Plating

Category: Iron NM Cable Connectors

Flex Connector, 90°, Squeeze, 1-1/4 Inch, Malleable Iron

Category: 90 Degree Two Screw Squeeze Flex Connectors

Liquidtight Connector, 90°, 1 Inch, Grounding, Malleable Iron, Insulated, 14 - 4 AWG

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Service Entrance Cable Connector, 3/4 Inch Diameter, Zinc Die Cast, For USe With NM and SEU Cable

Category: Zinc Die Cast NM Cable Connectors

Liquidtight Connector, Straight, 1-1/2 Inch Diameter, Aluminum, For Use In Corrosive Environments

Category: Straight Aluminum Liquidtight Flex Connectors

1-1/4" Liquid Tight D/c 90d angle Conn

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

3/8 inch, Snap-In Connector, 1/2 inch, KO, Material: Zinc Die Cast.

Category: Zinc Die Cast NM Cable Connectors

3/8 inch, Double Snap-Tite Insulated Throat Zinc Die-Cast Connector - To ground and secure MC, AC, MCI-A, MC-PCS, and flexible metal conduit to boxes and enclosures in dry locations - 14/2 - 10/3 - Cable size 0.395 - 0.638

Category: 90 Degree Malleable Steel MC / AC Connectors

3" Liquid Tight D/c 90d Conn

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

NM Cable Connector, Push-In, Plastic, 1/2" KO Size, 3/8" Trade Size. Install From Inside or Outside the Box.

Category: Non-Metallic NM Cable Connectors

Liquidtight Sealing Gasket, 1 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

2 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range 1.70 to 2.20.

Category: Single Barrel MC / AC Connectors

Liquidtight Connector, 45°, 1 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors