"wiremold"

Combination Carpet and Tile Flange, 2-Gang, Powder-Coated Aluminum, Aluminum

Category: Square / Rectangle Recessed Box Flanges

WMD RFBA4R25OG RFBA 4G 2.5 IN

Category: Recessed Compartment Boxes

WMD EFB45CTCAA EVO FLR BX SUR

Category: Square Recessed Floor Boxes

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9 Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

WMD RFBA6R30 RFBA 6G 3.0 IN R

Category: Recessed Compartment Boxes

2-Gang Shallow Floor Box

Category: Recessed Compartment Boxes

WMD 25DTP-B-WH

Category: Steel Power Poles

Service Box Plate, Metallic, Type: Duplex Receptacle. For use with 525 Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Decorator/GFCI Receptacle. For use with 525 Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Single Receptacle Cover Plate – 2.13" [54mm] diameter. For straight blade or locking single receptacles. Mounts commercially available straight blade or locking single receptacles with face diameters of 2.13" (52mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Two-compartment pole. Nominal material thickness .050" [1.8mm].Furnished unwired without outlets.Two 8" [203mm] removable covers with KOs for modular jacks and modular furniture communication outlets. Mounting hardware, entrance end plate, and ceiling trim plates furnished. Length: 10'5"

Category: Aluminum Power Poles

Steel, Supporting Clip, 52000 Series. Size: 2". Ivory.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, External Elbow, NM2000 Series. Size: 1" Width. PVC, Ivory.

Category: Plugmold Elbows

Non-Metallic, Base, NM2000 Series. Size: 8' Length, 1-3/4" Width. PVC, Ivory.

Category: Plugmold Bases

Four-Gang Cover, Two Duplex Openings, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Non-Metallic, Cover Clip, 2900 Series. Size: 2" Length. PVC, White.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Steel, External Corner, 3000 Series. Size: 4" Length, 1-1/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Non-Metallic, Drop Ceiling Connector, 2800 Series. Size: 2-3/8" Length, 1-9/16" Width. PVC, White.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Aluminum, Cover, AL Series. Size: 5' Length, 4-7/8" Width, .075" Thickness. Satin Anodized Finish, Aluminum. Package Quantity: 8.

Category: Large 2-Piece Metallic Raceway Covers

Steel, 90° Internal Elbow, 1500 Series. Size: 2-1/2".

Category: Metallic Overfloor Raceway Elbows

Adjustable Floor Box, 1-Gang, Depth: 3-7/16". Cubic Inches: 48". Knockouts: (4) 1". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour), Cast Iron

Category: Recessed Adjustable Floor Boxes

Non-Metallic, Blank End Fitting, PN03 Series. Size: 11/16" Length. PVC, White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Floor Box Assembly, Furniture Feed, Diameter: 4 Inch, (2) 1/2 Inch and (1) 3/4 Inch Conduit Openings, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Black, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes