Search results

Cable Tie, Black Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (220 F), Weather and Ultraviolet Resistant for Indoor and Outdoor Applications, UL/EN/CSA62275 Type 2/21S Rated for AH-2 Plenum and as a Flexible Cable and Conduit Support, Length of 770.61mm (30.34 Inches), Width of 6.93mm (0.273 Inches), Thickness of 1.52mm (0.06 Inches), Tensile Strength Rating of 534 Newtons (120 pounds), 50/PK

Category: Non-Releasable Cable Ties

Cable Tie, Heavy Cross Section, Length: 30", Width: 0.27", Maximum Bundle Diameter: 9", Tensile Strength: 120 lb. Temperature Rating: 185°F (85°C). Package Quantity: 50. Color: White.

Category: Non-Releasable Cable Ties

Meter Main, 200 Amp, 240 Volt AC, 4 Jaw, 1-Phase, Main Breaker, 8 Space, 16 Circuit, Horn Bypass, OH/UG Service, Ringless, NEMA 3R, Closing Plate, Connector Lugs

Category: Meter Mains - With Distribution

Tilt Leg Kit, Fixed Tilt Leg, 30", Mill, North Tilt Leg Length: 30"

Category: Solar Tilt Leg Kits

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.

Category: Meter Mains - With Distribution

Cable Shears, Length: 22" to 30", Capacity: 38mm Cable

Category: Shears

3/4" x 30" x 3" anchor bolt set (four individual bolts)

Category: Lighting Pole Accessories

EXGJH Flexible Coupling, 3/4 x 30 Inch Length, Explosionproof and Dust-Ignitionproof, Watertight, Stainless Steel End Fittings and Outer Braid, Stainless Steel Inner Core with Insulating Liner, Both End Fittings Female with Removable Male Nipple, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Type ECGJH Couplings

Cover For Underground Enclosure, Marked "ELECTRIC", 30 x 17 Inch, Light Duty, Bolt Down, Concrete

Category: Non-Metallic Underground Pull Box Covers

Underground Enclosure, Standard Open Bottom, 17 x 30 x 12 Inch, Polymer Concrete, Includes FDOT Stencils

Category: Rectangular Concrete Underground Pull Boxes

3/4 in. X 30 in. X 3 in. anchor bolts, SKU - 800957

Category: Lighting Pole Accessories

Wire Trough, Hinged Cover, Size/Dims: 6" x 6" x 30", Material/Finish: Steel/Gray

Category: NEMA 12 Wire Trough

EXGJH Flexible Coupling, 1/2 x 30 Inch Length, Explosionproof and Dust-Ignitionproof, Watertight, Brass End Fittings and Bronze Outer Braid, Brass Inner Core with Insulating Liner, Both End Fittings Female with Removable Male Nipple, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Type ECGJH Couplings

Threaded Conduit Nipple, 2 Inch x 30 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

High Performance Cable Tie, Black Color Nylon 6.6, Weather and Ultraviolet Resistant, Length of 770mm (30.3 Inches) for Bundle Diameter up to 229mm (9.02 Inches), Width of 6.9mm (0.27 Inch), Tensile Strength Rating of 534 Newtons (120 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 85 Degrees Celsius (185 F)

Category: Non-Releasable Cable Ties

Pyramid ST Bridge Assembly, Length 30 Inch, Height 5.6 Inch, Width 8 Inch, Steel/Hot Dip Galvanized Strut Support With UV Stabilized Polypropylene Base

Category: Pyramid Pipe & Equipment Supports