Search results

CP100NB WITH 1-22.35 HOLE

Category: Polycarbonate Pilot Device Enclosures

Contactor, Auxiliary Contacts, 1 Normally Open, 1 Normally Closed, Series 5000, 5DP Series

Category: Starter & Contactor Auxiliary Contacts

JOSLYN KTM32-1 SZ2 3P CONTACT

Category: Starter & Contactor Auxiliary Contacts

Contactor, Definite purpose, DC Drive, 3-Pole, 2 Normally Open, 1 Normally Closed, 30 Amp, 120 Volt AC Coil, 500 Volt DC

Category: 3-Pole Definite Purpose Contactors

JCC HLD-6 HATCHWAY LIMITAMP SWITCH

Category: Assembled Limit Switches

JCC A102-302350A ASM LEVER ROLLER

Category: Fixed Roller Limit Switch Operators

Limit Switch, Mill Duty, 2 Normally Open or Normally Closed Contact, Standard Enclosure, Right Hand, with Operating Lever, Steel Roller, 25 Amp, 600 Volt AC, 250 Volt DC

Category: Assembled Limit Switches

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 19.29" W: 17.126" D: 14.5" Weight: 101.85Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Softstarter PSTX60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

TB LB0036-02-M REPLAEMENT MIDDLE

Category: Open Lighting Contactors

VAC INT 3PH 27KV 600A 80CTRL PRK ST

Category: Medium Voltage Vacuum Contactors

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 12.4" W: 5.9" D: 7.6" Weight: 13.45Lbs.

Category: Advanced Control Softstarters

THB GSUL2SS-240 SAFE GROUND I

Category: Intelligent Safety Relays

MVI.33PH 38KV 600A 80CONTROL 50FT

Category: Medium Voltage Vacuum Contactors

NO 1-33 MARKR CARD

Category: Terminal Block Vertical Marking Cards