Search results

Sensor, Proximity, Magnetic, Sealed Reed, Miniature, Surface Mount, Overhead Door Switch, Stainless Steel, Armored Cable, Aluminum Body, NEMA 1/2/3/4/4X/5/6/12, IP67, Normally Open Contacts, 7.5 Watt Load, 100 Volt AC/DC

Category: Analog Inductive Proximity Sensors

Heat Detector - Rate Compensation, All-weather Vertical, Box Mount (1/2 NPT), FM & UL - 194¦F (Requires STONCO27 or equal)

Category: Magnetic Actuators

Sensor Switch, Magnetic, Non-Contact, Interlock/Position, Nickel Plated Aluminum, NEMA 1/2/3/4/4X/5/6/12, IP67, Normalyy Open, 100 VA, 84 Watt, 120 Volt AC, 0.5 Inch Sensing Range, 6 Inch Lead Length

Category: Threaded Body Capacitive Proximity Sensors

CP100NB WITH 1-22.35 HOLE

Category: Polycarbonate Pilot Device Enclosures

Softstarter PSTX60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 19.29" W: 17.126" D: 14.5" Weight: 101.85Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

TB LB0036-02-M REPLAEMENT MIDDLE

Category: Open Lighting Contactors

EDW 111-5X-06J-G1 111 RE N.O.

Category: Magnetic Detectors

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 12.4" W: 5.9" D: 7.6" Weight: 13.45Lbs.

Category: Advanced Control Softstarters

VAC INT 3PH 27KV 600A 80CTRL PRK ST

Category: Medium Voltage Vacuum Contactors

INT-05-024,SAFETY EXPANSION RE

Category: Intelligent Safety Relays

THB GSUL2SS-240 SAFE GROUND I

Category: Intelligent Safety Relays

125 Reed, 100VA, Normally Open, 3 Amp Max, SJTOW 18/2 12Ft, Y Actuator

Category: Magnetic Actuators

EDW INT-04-024 INT-04-024 EME

Category: Intelligent Safety Relays

12-24V DC Pulsating Buzzer. Color: Black. Frequency: Approx. 2.8kHZ. Loudness: Min 90 dB.

Category: Buzzer Pilot Devices