Search results

OZG 7ASDP 7A INERTIA SWITCH N

Category: Water Pump Pressure Limit Switches

CP100NB WITH 1-22.35 HOLE

Category: Polycarbonate Pilot Device Enclosures

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 19.29" W: 17.126" D: 14.5" Weight: 101.85Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Softstarter PSTX60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

TB LB0036-02-M REPLAEMENT MIDDLE

Category: Open Lighting Contactors

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 12.4" W: 5.9" D: 7.6" Weight: 13.45Lbs.

Category: Advanced Control Softstarters

VAC INT 3PH 27KV 600A 80CTRL PRK ST

Category: Medium Voltage Vacuum Contactors

Control Center Name Plate, Legend Stop, Used On NCSEW and Class 441 Control Operator

Category: 30mm Pushbutton Legend Plates

THB GSUL2SS-240 SAFE GROUND I

Category: Intelligent Safety Relays

Explosion-Proof Non-Illuminated Pushbutton, Type Short Barrel, Operation Type Momentary, Contact Configuration 1NC, Contact Rating 600 VAC, Cap/Lens Color Red, Enclosure Material Copper-Free Aluminum, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/7BCD/9EFG, Approval UL 886, CSA C22.2, Connection Size 3/4 Inch NPSM, Constructional Feature Explosion-Proof, Application Hazardous Location

Category: 30mm Hazardous Location Pushbutton Operators

MVI.33PH 38KV 600A 80CONTROL 50FT

Category: Medium Voltage Vacuum Contactors

OZG TBSM SWITCH VIBRATION NEM

Category: Assembled Miniature DIN Safety Interlock Limit Switches

Explosion-Proof Non-Illuminated Pushbutton, Type Short Barrel, Operation Type Momentary, Contact Configuration 1NO-1NC, Contact Rating 600 VAC, Cap/Lens Color Black, Enclosure Material Copper-Free Aluminum, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/7BCD/9EFG, Approval UL 886, CSA C22.2, Connection Size 3/4 Inch NPSM, Constructional Feature Explosion-Proof, Application Hazardous Location

Category: 30mm Hazardous Location Pushbutton Operators

Motor Vibration Switch, Type Vibration Switch, Used On Motor/Generator/Engine/Pump/Fan, Approval UL, Material Cast Copper Free Aluminum Enclosure, Finish Gray Epoxy Powder Coated, Inclusion Manual Reset Button, Switch Current Rating 15 Ampere at 125/250/480 VAC, 1/2 Ampere at 125 VDC, 1/4 Ampere at 250 VDC, Switch Power Rating 1/8 HP at 125 VAC, 1/4 HP at 250 VAC, Enclosure Class I Div 1 2 Group B C D Zone 1 2 Group IIA IIB Hydrogen, Class II Div 1 2 Group E F G, Class III, NEMA 4/7B/7C/7D/9E/9F/9G

Category: Assembled Miniature DIN Safety Interlock Limit Switches

Switch, Inertia, 7A Series, 1 Normally Open, 1 Normally Closed Contact, NEMA 7/9, Snap Action

Category: Water Pump Pressure Limit Switches