Search results

CP100NB WITH 1-22.35 HOLE

Category: Polycarbonate Pilot Device Enclosures

AUX. CONTACT NO+NC <125A NF

Category: Disconnect Switch Auxiliary Contacts

SHAFT PISTOL HANDLE 6X6X430MM

Category: Disconnect Switch Shafts

CONTACT BLOCK, 1 NO, 10A

Category: Disconnect Switch Auxiliary Contacts

SM PWR DIST BLK END PLATE

Category: Terminal Block End Sections

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 1 pin.

Category: Terminal Block Jumper Bars

LUGS 2X#2 600MCM 800A SWITCH/6

Category: Disconnect Switch Lug Kits

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 19.29" W: 17.126" D: 14.5" Weight: 101.85Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Softstarter PSTX60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 12.4" W: 5.9" D: 7.6" Weight: 13.45Lbs.

Category: Advanced Control Softstarters

MVI.33PH 38KV 600A 80CONTROL 50FT

Category: Medium Voltage Vacuum Contactors

VAC INT 3PH 27KV 600A 80CTRL PRK ST

Category: Medium Voltage Vacuum Contactors

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 130 FLA (Full Load Amps). Heavy Duty: 104 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 14.8" W: 7.8" D: 9.3" Weight: 15Lbs. 8 Inch Width, 15 Inch Height, 11 Inch Depth ** Qty 2 OF ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

NO 1-33 MARKR CARD

Category: Terminal Block Vertical Marking Cards

The softstarter PSTX85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.

Category: Advanced Control Softstarters