Search results

CP100NB WITH 1-22.35 HOLE

Category: Polycarbonate Pilot Device Enclosures

REE 04958-125 ROPE OPERATED SWITCH,REES,SLACK CBL,CNT CONFIGURATION: HELD NO BLCK #50702-000

Category: Safety Actuators

REE 04958-100 ROPE OPERATED

Category: Safety Actuators

CONTACT BLOCK REES 14/2 AWG STRD 0 TO +55 DEG C OPERATING OLD CATALOG NO: 40702

Category: 30mm Contact Blocks

REES 40102-102 CONTROL SWITCH

Category: 30mm Mushroom Head Pushbutton Operators

Rees; Contact Block; Cable Size: 14/2 Awg Stranded; Operating Temperature: 0 To+55 Deg C; Old Catalog Number: 40701; Note: Operating Temperatures At 0 Deg C Are Based On The Absence Of Freezing Moisture And Liquids; Size: 1.700 In Length X1.350 In Width X 0.820 In Depth; NEMA: 12/13; Ip: 65; Storage Temperature: -40 To +85 Deg C; Normal Potential: 110 - 120 Vac, 220 - 240 Vac, 440 - 480 Vac, 550- 600 Vac At Power Factor 0.35 Or Less; 115 - 125 Vdc, 230 - 250 Vdc At Inductive Loads As Specified In Section 125 Of Industrial Control Devices, Controllers And Assemblies, Ansi/NEMA Ics 2-1988; Normal Current: 6, 3, 1.5, 1.2, 2.2, 1.1 Amp; Inrush Current: 60, 30, 15, 12 Amp; Contact Designation: A; Circuits: 1; Normal Function: Open; Contact Finish: Gold Plated; Stroke: 0.200 In To Close; Blockheight: 0.950 In

Category: 30mm Contact Blocks

REE 00579-132 PUSH BUTTON SWITCH,REES,DBL,ACTION: MOMENTARY,SLOW-MAKE/SLOW-BREAK,NEMA : 12/13

Category: 2-Element Control Stations

Rees; Rope Operated Switch; Slack Cable; Contact Configuration: #9 No + Nc; Action: Momentary Slow Make/slow Break; Size: 2.810 In Length X 7.270 In Width; Actuator: Pushbutton; Operating Temperature: 0 To +55 Deg C; Environmental Conditions: -40 To +85 Deg C Storage Temperature; Normal Potential: 110 - 120 Vac, 220 -240 Vac, 440 - 480 Vac, 550 - 600 Vac At Power Factor 0.35 Or Less; 115 - 125 Vdc, 230 - 250 Vdc At Inductive Loads As Specified In Section 125 Of Industrial Control Devices, Controllers And Assemblies, Ansi/NEMA Ics 2-1988; Note: Operatingtemperatures At 0 Deg C Are Based On The Absence Of Freezing Moisture And Liquids; Normal Current: 6, 3, 1.5, 1.2, 2.2, 1.1 Amp; Inrush Current: 60, 30, 15, 12amp; Trip Force: 6 Lb; Operating Force Between 10 Ft Supports: 0.700 Lb; Mechanical Life: 1000000 Operations; Wire Size: 14/2 Awg Stranded; NEMA: 12/13; Old Catalog Number: 3275; Ip: 65; Includes: Sealing Gasket And Four Mounting Screws; Contact Finish: Gold Plated; Lever Finish: Nickel Plated

Category: Safety Actuators

Switch, Slack Cable Operated, Yellow, 10 Pound Trip Force, 2 Normally Open/Normally Closed, Positive Break Contacts, Manuel Reset, Positive Break, Old Number 2669

Category: Limit Switch Actuators

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 19.29" W: 17.126" D: 14.5" Weight: 101.85Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Softstarter PSTX60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

TB LB0036-02-M REPLAEMENT MIDDLE

Category: Open Lighting Contactors

Softstarter PSTX300-600-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 12.4" W: 5.9" D: 7.6" Weight: 13.45Lbs.

Category: Advanced Control Softstarters

VAC INT 3PH 27KV 600A 80CTRL PRK ST

Category: Medium Voltage Vacuum Contactors

THB GSUL2SS-240 SAFE GROUND I

Category: Intelligent Safety Relays