Search results

Conduit Bushing, Insulating, 3 Inch, Threaded, Impact Resistant, Non-Metallic. For use with Rigid Metal and IMC Conduit.

Category: Rigid & IMC Bushings

Grounding Bushing, 3 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 2/0 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 3-1/4 IN Width, 2-1/8 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

AC/Flex Connector, 90°, Squeeze, 3", Malleable

Category: 90 Degree Two Screw Squeeze Flex Connectors

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 3 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Rigid Compression Couplings - Iron

Grounding Bushing, 3",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 4.13 IN Outside Diameter, 2.45 IN Inside Diameter, 3 X 2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 N

Category: Reducing Washers

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 2-1/2 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-1/32 IN Maximum Diameter X 2-1/8 IN Length, 1 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

Reducing Bushing, Threaded, 3 x 1-1/2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type RB Reducing Bushing, Size: 4 X 3 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/2 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 3 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 3-1/8 - 3-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-1/4 IN Length X 4-5/8 IN Width, 15/16 IN T

Category: Straight Squeeze Flex Connectors

Reducing Washer, 3" x 1-1/2", Steel

Category: Reducing Washers

Liquidtight Connector, 90°, 2-1/2", Malleable Iron, Non-Insulated, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 3 IN, Connection: Tapered MNPT Hub, Conductor Range: 1 - 4/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type RB Reducing Bushing, Size: 3 X 2-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/4 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Gro

Category: Iron Alloy Reducing Bushings

CABLE SUPPORT

Category: Steel Rigid Conduit Cable Supports