Search results

Conduit Bushings, Threaded, 2-1/2 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Features: Physical Dimension 3/4 In Length X 1 3/8 In Diameter, Thread Length 7/16 In , Application: Threadless Rigid Conduit, Standard: Ul 514b, Fed Spec: W-f-408e, NEMA: Fb-1, Size: 0.5in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1-1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-5/8 IN Maximum Diameter X 1-3/8 IN Length, 5/8 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

Grounding Bushing, 2-1/2 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 2/0 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3-1/2 IN Outside Diameter, 2.45 IN Inside Diameter, 2-1/2 X 2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C2

Category: Reducing Washers

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 2 1/2inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Reducing Washer, 4" x 2-1/2", Steel

Category: Reducing Washers

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-45/64 - 2-61/64 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-1/16 IN Length X 4-1/16 IN Width,

Category: Straight Squeeze Flex Connectors

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3-1/2 IN Outside Diameter, 1.98 IN Inside Diameter, 2-1/2 X 1-1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CS

Category: Reducing Washers

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 4-1/8 IN Width, 3 IN Height, Third Party Certification: UL

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type RB Reducing Bushing, Size: 3 X 2-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/4 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Gro

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type IS Beam Clamp, Malleable Iron Clamp, Steel Screw, Hardened Case, 900 LB Maximum Load, 1-1/8 IN Maximum Jaw Opening, Finish: Clamp: Hot Dip Galvanized, Screw: Zinc Electroplated, Length: 2-5/8 IN, 1/2-13 Tapped Holes, 2-1/4 IN Height,

Category: Beam Clamps - Adjustable

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Conductor Range: 1 - 4/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 4-5/8 IN Width, 2.938 IN Height, 2-3/4 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZGBBL-250

Category: Rigid & IMC Bushings

OZ-Gedney BS-A Series Domed Top Design Cover, 2-1/2 - 3 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Aluminum Conduit Body Opening

Category: Aluminum Conduit Body Covers

Features: Concrete Tight, Male Hub 1 In Thread, Application: Threadless Rigid Conduit And Imc, Standard: Ul 514b, Fed Spec./cid: A-a-50553, Ansi/NEMA: Fb-1, Trade Size: 2.5in, Outside Diameter: 3.5625in, Length: 2.125in,material: Malleableiron

Category: Iron Rigid Conduit Set Screw Connectors