Search results

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 3-5/16 IN Maximum Diameter X 1-1/2 IN Length, 11/16 IN Thread Length, Third Party Certi

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-1/2 IN Width, 2 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 1-1/4 - 1-1/2 IN, Closed-Cell Neoprene, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Grounding Bushing, 1-1/4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Thermoplastic Insulator Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney BS-S Series Domed Top Design Cover, 1-1/4 - 1-1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Sta

Category: Steel Conduit Body Covers

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/4 X 1 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A, B

Category: Steel Reducing Bushings

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1 1/4inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 4.13 IN Outside Diameter, 2.97 IN Inside Diameter, 3 X 2-1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22

Category: Reducing Washers

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 1-1/4 IN, 2-3/8 IN Outside Diameter, Length: 2-3/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Thir

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Spec 5 Type LB Conduit Body, 1-1/4 IN Hub, Length: 8-1/4 IN, 2-5/8 IN Width, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL F

Category: Type LB Iron Conduit Bodies

Reducing Washer, Steel, 1-1/2" x 1-1/4"

Category: Reducing Washers

Reducing Washer, Steel, 1-1/4" x 1/2"

Category: Reducing Washers

Liquidtight Connector, 45°, 1 Inch, Non-Insulated, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-7/16 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/4 IN Length X 2-1/2 IN Width, 5/8 I

Category: Straight Squeeze Flex Connectors

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers