Wire Duct, Wire Trough, Wireway

Fiberglass Feed-Through, Cut-off fittings are used for custom fit lengths. This Cutoff Fitting Feed-Through, F44WXFG item measures 4.00x4.00 inches with a material of Fiberglass colored Gray.

Category: Wireway Cutoff Fittings

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F22GSHGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

Layin Galvanized Closure Plates used for closing and sealing the end of a wireway section or run. This Closure Plate, F22GCPNKGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Closure Plates

Fiberglass Feed-Through Wireway, Straight Section, NEMA Type 12 and 3R, Dimensions: 4" x 4" x 12"

Category: Screw Cover Wireway

Fiberglass Feed-Through Elbows for 45-degree turns in corrosive indoor or outdoor applications. This 45-Degree Elbow Feed-Through, F44WE45FG item measures 4.00x4.00 inches with a material of Gray, Fiberglass colored Gray.

Category: Wireway Elbows

Screw-Cover Wiring Trough Type 1 used for indoor applications protecting against dirt or moist. This Wiring Trough NEMA Type 1, A8848T1T item measures 8.00x8.00x48.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

Wireway 90° Elbow, NEMA Type 1, Lay-In, Outside Opening, Steel, Galvanized, Size: 6" x 6"

Category: Wireway Elbows

Lay-In Galvanized Wireway, Straight Section, Screw Cover, NEMA Type 1, Dimensions: 2.5" x 2.5" x 120"

Category: Screw Cover Wireway

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 12" (304.8 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 14.7" (373.4 mm) long, 2.2" (56.4 mm) wide, and 14.7" (373.4 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

Lay-in Galvanized 90-Deg Elbow-Tee-Crosses used as tee or cross for left or right turns. This 90-Degree Elbow Lay-in-Tee-Cross, F121290TXGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

Lay-in Galvanized 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F4445EGV item measures 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbows

Slotted Wall Wiring Duct, 1.5" x 2", Non-Adhesive, PVC, White, 120ft/Carton

Category: Standard Density Wire Duct

Used to support 2x2 and 4x4 Fiber-Duct™ Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket.

Category: Wireway Support Hangers

Splitter Trough, Type 1 splits feeder circuit conductors into multiple branch circuit conductors. This Splitter Trough Type 1 4-wire 600 amps, AST5604R item measures 60x11x7 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Left Hand CleanTray, CTS44TCLSS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

CleanTray 90-Degree Elbow used for 90-degree turns in washdown applications. This 90-Degree Elbow CleanTray Top Cover, CT46EFC90SS item measures 4.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Elbows

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Left Hand CleanTray, CTS46TCLSS item measures 4.00x6.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

Panduct® flush cover type D round hole wiring duct, 2 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type H hinged cover wide slot wiring duct, 1.5 W x 2 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 3 H, 6' length, PVC, adhesive, black.

Category: Standard Density Wire Duct

Panduct® type NE halogen-free wiring duct, 4 W x 4 H, 6' length, halogen-free, adhesive, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct Wide Slot Wiring Duct, Type G, 1.75" W x 2.12" H x 6' L, Lead Free PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Solid hinged duct, 2 W x 2 H, 6' length, PVC, white, no mounting holes, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Wire Basket Support Clip, Rod Size 1/2 Inch, Accomodates 1 to 1 1/4 Inch Side Rails, 120 lb Static Load Rated, Steel/Electrogalvanized

Category: Wireway Support Hangers