Wire Duct, Wire Trough, Wireway

Angled Trough, NEMA 1, 8 Inch x 8 Inch x 36 Inch, Conduit Size: 2 Inch, Cover Screws: 3.

Category: NEMA 1 Wire Trough

Slotted Wall Wiring Duct, 4 x 3 x 62 Inch (WxDxL), Non-Adhesive, PVC, White, 120 Foot per Carton

Category: Standard Density Wire Duct

Lay-in Painted Galvanized Wall Hangers are used to support a wireway run. This Wall Hanger, F88T3RWH item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

Wiring Duct Cover for 1" Duct, 6 ft Long, PVC, White

Category: Wire Duct Covers

Type 12 Lay-In Wireway, Hinge Cover, 12 Inch x 6 Inch x 12 Inch, Steel, Gray

Category: Hinged Cover Wireway

90 Degree Angle Sealing Plate for Type 12 Wireway, 2-1/2 x 201/2 Inch, Steel, Gray

Category: Wireway Angled Sealing Plates

EconoTrough protects wire and cable junctions and terminations exposed to wet conditions. This EconoTrough NEMA Type 3R, F6612RTGV item measures 6.00x6.00x12.00 inches with a material of Steel finish Galvanized.

Category: NEMA 3R Wire Trough

FiberRunner® Slotted Cable Routing Channel, 4" x 4", Yellow, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT Cover sold separately.

Category: Standard Density Wire Duct

EconoTrough protects wire and cable junctions and terminations exposed to wet conditions. This EconoTrough NEMA Type 3R, F121296RTGV item measures 12.00x12.00x96.00 inches with a material of Steel finish Galvanized.

Category: NEMA 3R Wire Trough

Wireway Straight Section, Lay-In, NEMA Type 1, Hinged Cover, Material: Steel, Dimensions: 12" x 12" x 36"

Category: Screw Cover Wireway

Feed-Through Nipples used between adjacent wireway sections or fittings adjusting wireway length. This Nipple Feed-Through Wireway, F22WN6 item measures 2.50x2.50x6.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections 90-Degree Elbow CW, F66LE9KT item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Panduct® type H hinged cover wide slot wiring duct, 3 W x 4 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

High Density Slotted Wall Wiring Duct, 1" x 1.5", Non-Adhesive, PVC, Gray, 120ft/Carton ***Cover Sold Separately***

Category: High Density Wire Duct

Wireway Open Adapter, 4 Inch x 4 Inch, Steel, Gray, For NEMA 1 Wireway and 90° Elbow-Tee Cross Fitting.

Category: Wireway Panel Adapters

Hangers are used to support a wireway run. This Drop Hanger, F66HD item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

High Density Slotted Wall Wiring Duct, 3" x 4", Non-Adhesive, PVC, White, 120ft/Carton ***Cover Sold Separately***

Category: High Density Wire Duct

Type 12 Feed-Through Reducer Bushing, Center Hole, 4 x 4 Inch to 2-1/2 x 2-1/2 Inch, Gray, Steel

Category: Wireway Panel Adapters

Lay-in Painted Flat-Cover Wireway, NEMA TYPE 1 Straight Section, Material: Steel, Dimensions: 2.5" x 2.5" x 36"

Category: Screw Cover Wireway

Sweep Tee offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F22T item fits 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Tee Fittings

Wireway 90° Elbow, NEMA Type 1, Lay-In, Inside Opening, Steel, Gray, Size: 2 x 2 Inch

Category: Wireway Elbows

Lay-In NEMA Type 12 Hinged-Cover Wireway, Straight Section, Gasketed, Size: 4 Inch Width, 4 Inch Depth, 10 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Finish. No Knockouts.

Category: Hinged Cover Wireway

Cross Fitting Lay-in Hinged-Cover, 4" x 4", Steel, Gray

Category: Wireway Elbow-Tee-Cross Fittings

Wireway , Flexible Ftg, Bulletin F20 (feed-through Type 12 Wireway), Size/dims:2.50x2.50, Material/finish: Rubber/steel

Category: Wireway Telescope Fittings